help me to release and fix my green laser please

[Roy7]

Hallo , Everyone

i put by mistake my laser in front the fire

now the point of laser look very big and the beam is too Thin and look very stupid

i search in google i finde way to release but not for my laser

my laser look like this

http://image.made-in-china.com/2f0j...ghest-Power-Allowed-Military-Grade-LEG-4-.jpg

and the way to release for this laser

http://hosting.yourlaser.com/174/20...r-pen-fixed-focus-5mw-532nm-285029-Gallay.jpg

its very different

so now first how can i release my laser ?
seconde how can i fix it ?

i think the filter is distort


and i forget to say
my lasser 300mw an 532nm

 

[HitShane]

You must have burnt your lens. Could you take some close up pictures of your actual laser and post them here?

 

[Roy7]

i cant take a picture
but its look like this
http://i1054.photobucket.com/albums...5D46DBBC-533-00000055E40F7012_zps540b914f.jpg

not that big but look like it

 

[Eradicator]

You either melted the lens, or dirtied it with smoke. Since its just a pen laser, I would just invest in a new one. You can find way overspec ones on EBAY for around 5 bucks.

 

[Roy7]

ok but if there is any way to take out the lens please tell me

 

[HitShane]

Upload some pictures

 

[Bionic-Badger]

You mean like pop off the front? First see if you can unscrew it, and then try pulling the front off with your hands. Finally, if that doesn't work you'll need a vice and some wooden clamps to pull the front off.

 

[Roy7]

sorry guys for late

this some pic