Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

HELP, Dominator by Blord

M

mrm143

0
Joined
Aug 28, 2014
Messages
13
Points
0
I have a buddy who brought his dominator to show me, But he cant get it to focus on a small beam..

He had it going last night, said he turned the top, it became unfocused, and now he cannot get it to refocus....

Is their some kind of trick to this thing??

Spinning the copper does nothing
 





Sounds like the threads on the lens holder binded in the module and got loose on the focus ring. Unscrew the focus ring completely and see what's going on.
 
TheDukeAnumber1 said:
Sounds like the threads on the lens holder binded in the module and got loose on the focus ring. Unscrew the focus ring completely and see what's going on.
Click to expand...



So if you take off the lens, your talking about the piece IN the housing, if that's the case, which it may be as he said he did screw it tight, whats the best way to loosen this??

Its pretty tight and doesn't want to move
 
If you already have the copper focus ring off you'll see the brass lens holder. If it's stuck there should be two notches in the top of the brass where you can use a screwdriver or the back end of a razor blade to unscrew it. Just be careful not to damage the threads.
 
Last edited:
The lens holder comes out with no problem, I thought it was the piece the lense holder screws into


should the lens be nice and tight inside the holder itself
 
Yes, it should be nice n snug, if not you'll need to tighten the brass ring inside the lens holder.
 
ok so the lens holder is fine, its still not focusing...

What about the piece INSIDE the copper housing?
 
should the lens holder be pointing with the notches up, or the notches down inside..
 
TheDukeAnumber1 said:
If you already have the copper focus ring off you'll see the brass lens holder. If it's stuck there should be two notches in the top of the brass where you can use a screwdriver or the back end of a razor blade to unscrew it. Just be careful not to damage the threads.
Click to expand...

If the copper focus ring is facing down and the lens holder is going into it, should the notches be UP, or DOWN
 
I think its all stripped LOL

Is their anyway to order the copper focus ring, the lens piece, and then the inner piece that screws inside? Not even sure how this comes out....

Im getting frustrated, its about to see the bottom side of my car tire...

Anyone want to buy it cheap AS IS LOL
 
mrm143 said:
If the copper focus ring is facing down and the lens holder is going into it, should the notches be UP, or DOWN
Click to expand...

Notches go into the focus ring, and don't quadruple post, just edit the first post next time.
 
Last edited:
He should he doing the leg work himself ya know, and how much $ ? :)

And at this point pictures would help us help you much quicker.
 
Last edited:
You must log in or register to reply here.





Back
Top