hakzaw1
0
- Joined
- Apr 2, 2009
- Messages
- 10,661
- Points
- 113
THIS GB NOW CLOSED
The price now at the AixiZ is 205$ plus shipping.
aixiz.com
$10 discount to LPF members-15 in stock 9/25/2010
iirc $5 to ship to US
Ifb you want one go to AixiZ.com NOT aixiz eEKBay--always let aixiz know you are a LPF member.
This is a GB in the sense that there are only going to be 25 made in the first batch(5 already spoken for)
I have a review started in the review section. I will be adding more to it soon.
Not positive ATM about the shipping BUT I THINK it will be somewhere between 6$ and 10$ sent from Houston and to your door in less that a week.(once they arrive)
UPDATE-
- for the GB the shipping to US will be only $5 per unit and they(the TTL version) should be here by Sept 18th:yh:
It comes with the driver set to put out 350mWs and has a pot that make it easy to adjust. The Glass lens on the LOANER sample I have was pretty well focused and it can be adjusted once you remove the ring in the front. Although it resembles the similar one from O-Like it is not the same. The driver is bonded into the case lid instead of the base and AixiZ says it should make for better heat dissapation. The heatsink and driver case are from the same China maker thus the same look as the more expensive O-like(172 to 180$) which depending when you look can cost as much as 25$ to ship.
We already know about Aixiz and their support after the sale. Chuck backs up these just like all the other items from AixiZ. (He has 7700 Feedback Score at 99.9 % Positive on Feebay)
The O-like site says you have 7 days to return the laser at your expense.
The AixiZ price is 165$ each and afaik , it may be higher once these are put on the aixiz site and ebay, but not any lower. They use the C***o diode from an a-130 projector( O-Like gets thier diodes from AixiZ btw-afaik)
If you want to get in on the first batch please PM me and I will put you on the list. I am not an agent or employee of AixiZ and I am not middle-manning these-- you will be paying Aixiz for them and they will ship them out. add 12 vdc and you are ready to go--very small and weighs less than 200 grams- has TTL blanking. I suggest adding additional cooling(fan) if you intend to raise the mAs much and run it non-stop. At the stock setting mine did not even get warm.
plz let me know if you have any questions-- thank you for looking---Len
The price now at the AixiZ is 205$ plus shipping.
aixiz.com
$10 discount to LPF members-15 in stock 9/25/2010
iirc $5 to ship to US
Ifb you want one go to AixiZ.com NOT aixiz eEKBay--always let aixiz know you are a LPF member.
This is a GB in the sense that there are only going to be 25 made in the first batch(5 already spoken for)
I have a review started in the review section. I will be adding more to it soon.
Not positive ATM about the shipping BUT I THINK it will be somewhere between 6$ and 10$ sent from Houston and to your door in less that a week.(once they arrive)
UPDATE-
- for the GB the shipping to US will be only $5 per unit and they(the TTL version) should be here by Sept 18th:yh:It comes with the driver set to put out 350mWs and has a pot that make it easy to adjust. The Glass lens on the LOANER sample I have was pretty well focused and it can be adjusted once you remove the ring in the front. Although it resembles the similar one from O-Like it is not the same. The driver is bonded into the case lid instead of the base and AixiZ says it should make for better heat dissapation. The heatsink and driver case are from the same China maker thus the same look as the more expensive O-like(172 to 180$) which depending when you look can cost as much as 25$ to ship.
We already know about Aixiz and their support after the sale. Chuck backs up these just like all the other items from AixiZ. (He has 7700 Feedback Score at 99.9 % Positive on Feebay)
The O-like site says you have 7 days to return the laser at your expense.
The AixiZ price is 165$ each and afaik , it may be higher once these are put on the aixiz site and ebay, but not any lower. They use the C***o diode from an a-130 projector( O-Like gets thier diodes from AixiZ btw-afaik)
If you want to get in on the first batch please PM me and I will put you on the list. I am not an agent or employee of AixiZ and I am not middle-manning these-- you will be paying Aixiz for them and they will ship them out. add 12 vdc and you are ready to go--very small and weighs less than 200 grams- has TTL blanking. I suggest adding additional cooling(fan) if you intend to raise the mAs much and run it non-stop. At the stock setting mine did not even get warm.
plz let me know if you have any questions-- thank you for looking---Len
Last edited:
