Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

FS is a Classic Custom Tmack Tmag 1.7+ Watt 445nm $150 NOW !!!!

Joined
Jun 6, 2014
Messages
435
Points
43
I have had this laser for about a year and a half. it has served me well. i am selling it because i like 462nm color better and i need the money. This laser is perfect for long run experiments. i ran this laser for 8 minutes straight with almost no drop in power. practically a flat line with a slight slant down. I posted below my 6 min lpm graph which is about as good as it gets. i wish i did the graph for the 8 min test but all well. I put the 3 element lens in because i feel like this lower power diode would be better suited for its tighter beam. leave the burning to the higher power diodes but i have to say this laser still burns like a boss when focused. and with up to an 8 minute run time it could burn longer then the higher power lasers. the best part about this laser is it uses 2 26650 batteries. even though i have had this laser for as long as i did iv only had to charge the batteries about 6 times. and each time they were only down to 3.8 volts so the batteries last forever. yes its big but you really dont need to worry about overheating. i would say 8 min max at a time but only if the air temp is cool. when i did the 8 min test the air temp was 65 degrees. when i shut off the laser it was just barley warm. i would just stick to 4-6 min for normal use. i put on quality custom stickers bought from a guy on this forum(i dont remember his name). Tmack heatsinked the driver to the body to get the longer run times. i will include a tiny magnet to act as a button top because the positive contact is recessed as seen in the photo below. that plus the pvc around it acts as a physical reverse polarity protection which is nice to have. if you have button tops just use them but this way works great. single element lens gets over 2W btw.

I payed $270 for this laser with the batteries. It has about 100 hours runtime on the diode i would guess. iv had it awhile but have not used it much. still runs like the day i got it. Tmacks lasers are truly top quality :)

Sale price is $180 now $175
Now a biblical price drop to $150 SHIPPED WITHIN THE USA for the laser and both 26650 batteries. I will ship anywhere but if your outside the united states im not responsible if seized. PM me for international shipping


PHOTOS
20150823_221352 by Alex Littig, on Flickr
20150823_221423 by Alex Littig, on Flickr
20150823_221438 by Alex Littig, on Flickr
20150823_221915 by Alex Littig, on Flickr
20150823_223008 by Alex Littig, on Flickr
c5b00a29-b94c-4d93-9d73-bb7b6884ea65_zps5lfo9twx.png
 
Last edited:





Joined
Jun 6, 2014
Messages
435
Points
43
Re: FS is a Classic Custom Tmack Tmag 1.7+ Watt 445nm price drop

Price drop
 
Joined
Jun 6, 2014
Messages
435
Points
43
Re: FS is a Classic Custom Tmack Tmag 1.7+ Watt 445nm price drop

A hypergiant size price drop to $150 shipped
 
Joined
Dec 15, 2014
Messages
6,782
Points
113
Hi,
As for the magnets you don't need them if the Mag Light switch was removed from the battery tube . iv'e done quite a few 2 cell ML builds, while the switch is out just solder a small dot on the switch contact wipe clean with alcohol and reassemble the battery tube. No need for magnets and you can use flats or buttons cells if you please.

Hopes this helps you a bit nice build you have enjoy it. Mag Light builds are awesome my favorite...

Rich:)
 

Attachments

  • IMG_1049.JPG
    IMG_1049.JPG
    51.2 KB · Views: 71
  • IMG_0986.JPG
    IMG_0986.JPG
    179.1 KB · Views: 48
  • IMG_0972.JPG
    IMG_0972.JPG
    109.3 KB · Views: 47
Last edited:





Top