FS Green Laser Module 532 nm High Quality Machined Case

[vanagon91]

hello Folks,

I have 5 of these units
Green Laser Module 532 nm 5 milliwatts.
Model number is GLM-R2P4-05a

This is a high quality industrial laser with an machined aluminum heatsink and case.

Voltage needed is 3 to 5 volts @approx. 200 milliamps.

Manufacture date is 8- 2006.

Made by Leadlight.

$20.00 plus shipping

 

[sinner]

Lets see who works with these on a regular basis.
As the logo says "industrial grade" i cant find a regular use of this laser for a hobbyist!!
Have you tried Eb*y?

 

[vanagon91]

Should I not have listed these lasers here??

 

[InfinitusEquitas]

Should I not have listed these lasers here??

No this is fine. I'm not sure if you're gonna have much luck selling them though.

Most folks on here are looking for 100mW+ modules.

Good luck.

 

[vanagon91]

Sir, Thank you I appreciate the feedback.
know I understand what the first response was about.
I will let them sit and see if anyone bite.

Thank you again

PauLC

 

[InfinitusEquitas]

Sir, Thank you I appreciate the feedback.
know I understand what the first response was about.
I will let them sit and see if anyone bite.

Thank you again

PauLC

Anytime, couple other things though... you should list your location, as that would affect shipping, and you need to post a picture of the modules or at least one module with your LPF user name, and today's date.

 

[Lase]

Aren't these the same modules that Ablaze was using for his laser gloves?

Unfortunatly the market for <50mW lasers is dropping.

Lase

 

[mnvikings1]

Are these lasers new or used? If new, we would be interested in getting all 5 for the $20 and the shipping cost.