Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

FS: 50mW green AixiZ labby no driver

B

ben74

0
Joined
Jan 7, 2008
Messages
678
Points
0
I have a 50mW labby with no driver, runs at 680mA around 50-80mW of green hardly any IR.

offers around $50
 

Attachments

  • DSC00678.JPG
    DSC00678.JPG
    653.6 KB · Views: 92





Honestly, that's not much less than the same thing WITH a driver.

When you get like a Flexdriver or something from drlava to run it, then you've paid more for a working 50mW than if you just bought it straight...

:-/
 
Ben -- Have you measured the output? Does it go 80 mW ?
I might be interested.

Mike
 
I cant measure the out put, but i had two and this was slightly more powerful.
 
680 mA seems high for 50 mW.  My Snoctony 50 puts out 53 mW @ 380 mA which seems more reasonable.  380 mA comes from the pot mod days of old when we got 40 to 50 mW and were HAPPY  :)

Mike
 
Well some when up to 140mW and its a c-mount diode and it does not heat up. Its is quite high, as i am getting a 80mW green  laser with a 200mW IR diode! from IgorT
 
Could you please answer a few questions?


Edit: some questions I had were answered pretty well by your 'exploding driver' posts in [link=www.laserpointerforums.com/forums/YaBB.pl?num=1213471542]Dave's thread[/link].


Are you shipping from Perth? Will you ship to the US? Any (rough) idea what the shipping costs would be to the US?

Payment: Paypal? Google Checkout? Other?

How much on-time has this thing seen?

Is this module the one that the first driver was hooked to when it died, or the replacement?

You already sold one of the modules with no driver [link=www.laserpointerforums.com/forums/YaBB.pl?num=1216665974]here[/link], and now you are selling another driverless module... what happened to the second driver? If it died too, was this module hooked to it at the time?

How have you been driving this module?

What was driving this module when you made the 680mA observation? How was that measurement made? Was that the current going in to the driver, or the current going in to the diode?


Thanks for your time,

- Foobario
 
Well 5 dollars will cover shipping, i live in Perth UK so i would ship to the US. Its had about 5 hours on. This is the first module of the two and i sold the second driver to scopeguy20. I used a 317 driver which i am now using for a blu-ray diode. The mA measurement was done by disma and i used a multimeter and a dummy load from IgorT to measure the 317 driver so i did not over power the diode. A good question you missed was which one i opened up which was the second one and not this one. PayPal is fine :)
 
You must log in or register to reply here.


Back
Top