Easy laser build. Blu-ray.

[Puma Fiend]

Hi everyone, I'm new to this forum but I've browsed around it several times and it kicks ass in the laser world. I was wondering how I can build a burning blu ray laser without having to solder anything. I have no experience with it, nor do I have the necessary equipment. As of right now I don't have any parts for the build either but thats why I'm seeking help. Any helpful info would be greatly appreciated.

 

[ARG]

Welcome to the forum!

Typically building is not easily done without a soldering iron.
You can find a soldering iron for fairly cheap these days, so you may want to consider it

You could buy the diode with the driver pre-attached here:
https://sites.google.com/site/dtrlpf/home/diodes/s06j-12x-405-diodes

Then get a battery holder and twist the bare ends of the wire together, maybe grab a switch as well.

 

[Cel]

You can't build one if you can't solder...

However, there are complete laser to buy from LPF members on BST section.

 

[Puma Fiend]

Welcome to the forum!

Typically building is not easily done without a soldering iron.
You can find a soldering iron for fairly cheap these days, so you may want to consider it

You could buy the diode with the driver pre-attached here:
https://sites.google.com/site/dtrlpf/home/diodes/s06j-12x-405-diodes

Then get a battery holder and twist the bare ends of the wire together, maybe grab a switch as well.

Thanks for your help. I've found the diode and module I want. Next step is to find a host I like.