DIY Laser Gun Build (walther PPK)

[jakeyboii]

hey i thought i'd give building another laser ago,
just really puzzled on were to start

what diode would best fit 17mm hole i can bore it out a little more if needed

reckon i could fit a battery in the 19mm mag?

Sorry i should of done me homework before asking people here, but i'd need all the help i can get

 

[Lazy Laser]

Oo that's too nice to be putting a laser in

Is it a replica or airsoft?

 

[jakeyboii]

Oo that's too nice to be putting a laser in

Is it a replica or airsoft?

its a replica i have another one to but a Russian Makorav 9mm

Want it?

and i think this ppk would look awesome as a laser gun it would have use

shooting ballons

 

[Lazy Laser]

Did you get them from the collectors armoury by any chance?
I went there once in QLD.. I was in heaven!

I think the not so famous Kipkay built a PPK laser of some sorts but I can't really remember

Would look hektic all polished with a 635nm in it

 

[jakeyboii]

Did you get them from the collectors armoury by any chance?
I went there once in QLD.. I was in heaven!

I think the not so famous Kipkay built a PPK laser of some sorts but I can't really remember

Would look hektic all polished with a 635nm in it

Wanna help me make it? Ill send you the Russian Makarov free for you help?

EDIT: I believe I did get them from there cost me a fucking fortune for both about $500

 

[Lazy Laser]

That's what happens when you have no competitors I guess, Charge whatever you bloody well want to..

Thinking about it, It might be a little tricky because they don't have screws you can undo to get into the internals do they?

 

[jakeyboii]

That's what happens when you have no competitors I guess, Charge whatever you bloody well want to..

Thinking about it, It might be a little tricky because they don't have screws you can undo to get into the internals do they?

I'm not to sure about that I know there 1 or 2 to get to the magazine area from there I'm not sure never thought about taking it about till now cause the cocking mechanism is playing up

EDIT: lawl yes that's what she said....

 

[Lazy Laser]

That could give you a big challenge then..
See if you can get it apart without messing it up too bad and go from there?

What were you planning on putting in it exactly?

PM if you'd like

 

[Livinloud]

mag looks too slim for a battery, possibly use something like a cell phone battery since its slim but off the top of my head i dont know any that would fit. can you give specs of the mag and is it hollow, etc....

 

[jakeyboii]

mag looks too slim for a battery, possibly use something like a cell phone battery since its slim but off the top of my head i dont know any that would fit. can you give specs of the mag and is it hollow, etc....

I can't give you the dimensions right now I'm in the car, but yes it's hollow

It would be pretty cool if I could make this gun rechargeable but this build is already way outta my league

 

[bobhaha]

I could give it a go for you... PM me if your interested.

 

[jakeyboii]

looks like the ppk is openable, little bit difficult but she does

seems like enought room for Driver, Diode, Switch etc

 

[Livinloud]

this would be one sick build if you or a group of people could figure it out!

 

[jakeyboii]

this would be one sick build if you or a group of people could figure it out!

My thoughts exactly

 

[Livinloud]

if you pulled that out here in america you'd be screwed by the cops, not sure how strict they are down under about replica guns. i know how strict they are on lasers so if they are as strict on guns then you best be EXTRA careful not to get caught :beer:

 

[jakeyboii]

if you pulled that out here in america you'd be screwed by the cops, not sure how strict they are down under about replica guns. i know how strict they are on lasers so if they are as strict on guns then you best be EXTRA careful not to get caught :beer:

Haha the cops would beat the fuck outta me an put me in prison lol

It's an inside gadget only lmao