DIY blu-ray- best options for the price?

[thentertaina]

im trying to build a Blu-ray laser and from what i understand i need a few things.


1) PHR-803T Diode+optics housing-hightechdealz.com/index.php?main_page=product_info&products_id=4

2) Driver (110mA)- rkcstr.nfshost.com/index.php?main_page=product_info&cPath=65&products_id=180

3) Kryton Barrel- cgi.ebay.com/Laser-barrel-high-power-laser-pointer-host-%2F-kit-_W0QQitemZ220352727647QQcmdZViewItemQQimsxZ20090129?IMSfp=TL090129123004r27101

batteries of course but i need some special ones like this ( hightechdealz.com/index.php?main_page=product_info&products_id=28) right?

sry if these seem like n00b questions, but i just wanna make sure i know what im doin before i do it.

 

[nateh202]

im trying to build a Blu-ray laser and from what i understand i need a few things.


1) PHR-803T Diode+optics housing-hightechdealz.com/index.php?main_page=product_info&products_id=4

2) Driver (110mA)- rkcstr.nfshost.com/index.php?main_page=product_info&cPath=65&products_id=180

3) Kryton Barrel- cgi.ebay.com/Laser-barrel-high-power-laser-pointer-host-%2F-kit-_W0QQitemZ220352727647QQcmdZViewItemQQimsxZ20090129?IMSfp=TL090129123004r27101

batteries of course but i need some special ones like this ( hightechdealz.com/index.php?main_page=product_info&products_id=28) right?

sry if these seem like n00b questions, but i just wanna make sure i know what im doin before i do it.

You can get the PHR installed in an aixiz on the forum for about 20 dollars shipped.
The rkcstr driver is fine.
For a host I would recommend the MXDL 3405 with a jayrob heatsink, 2 10440 batteries and a charger.
http://www.dealextreme.com/details.dx/sku.3405

 

[thentertaina]

....are there any cleaner looking hosts? Not so many bumps?

 

[lasersbee]

....are there any cleaner looking hosts? Not so many bumps?

"nateh202" gave you the DX link... just have a look at their other products....

Or if you want a smooth one... you can get one of these.....

http://www.laserpointerforums.com/forums/YaBB.pl?num=1204788577/0


Jerry

 

[thentertaina]

yea something like that. would this be able to fit it though?


laserpointerforums.com/forums/YaBB.pl?num=1224680882

 

[lasersbee]

yea something like that. would this be able to fit it though?


laserpointerforums.com/forums/YaBB.pl?num=1224680882

That smooth Kryton barrel host was designed for the Blu-Ray and red Laser
diodes...
You will need to read the Thread that I linked to... as well as the other threads
on this forum... the members here will will avoid spoon feeding you information
that is readily available by simply reading...........

Jerry

 

[thentertaina]

haha thank you.
im already on page 5....of 79  

im probably gonna get the barrel first check that out then decide what to do....i realy want a momentary push button on the side so ill have to mod it before i stick in the driver

 

[lasersbee]

haha thank you.
im already on page 5....of 79  

im probably gonna get the barrel first check that out then decide what to do....i realy want a momentary push button on the side so ill have to mod it before i stick in the driver

Great.... that you are reading..... [smiley=thumbsup.gif]

The Kryton is designed to take a Clicky Switch in the back end...

Jerry

 

[john_lawson]

Get a kryton there are works of ART



john just obtained 45 kiss A$$ points from KENOM

 

[lasersbee]

Get a kryton there are works of ART



john just obtained 45 kiss A$$ points from KENOM

Hey John.... you got something stuck to your nose..... :
;D ;D

Jerry