building a 2W laser using a 303 laser pointer housing wondering what driver would be used in this setup as this is my first project I am using a 2w laser diode and was also wondering if I could wire a 11.1v li-ion 2000mah battery into the circuit as well it is my first time any help would be appreciated thanks in advance
Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers
Buy Site Supporter Role (remove some ads) | LPF Donations
Links below open in new window
FrozenGate by Avery
Diy 2W laser
- Thread starter Spartan44
- Start date
- Joined
- Jul 10, 2015
- Messages
- 9,968
- Points
- 113
For a 303 host I suspect you would want a driver with a battery spring on the end, check ebay and read the specs for the input voltage range.
What kind of laser safety glasses do you have ?
This takes 2 x 3.7v cells in series, for a 303 it would be 2 x 18350 or 2 x 16340
If you want a good host that you can swap modules in and out that will work with all our favorite lenses you can talk to Lifetime17
What kind of laser safety glasses do you have ?
This takes 2 x 3.7v cells in series, for a 303 it would be 2 x 18350 or 2 x 16340
If you want a good host that you can swap modules in and out that will work with all our favorite lenses you can talk to Lifetime17
Last edited: