OK i have question i ordered a laser from dinodirect and ive only had it about 10days now and today i took the battery out to charge and the little spring fell out is there anyway to fix this? its a 150mw flashlight style laser! if anyone can help please do so! thank you!
Weecho, thank you for being polite about asking for help, it is nice to see manners in this day and age on the internet.
But sadly this thread is not the place to post that request for help.
Just because the word 'Dinodirect' is in the Thread title doesn't mean you can post anything about dinodirect in it. That question should be posted in the help section of the forum, or whatever specific wavelength of light section it is (532nm I am guessing). This thread is specifically for CRooFE's question about the laser/light combo's quality.
But, to give a quick answer, there is not much you can do except taking the module out of the pen and soldering the spring back onto the correct terminal on the driver (probably the -Vin since the host is most likely case positive).
Other than that, you are done for with that laser, sorry.
bump... Link added.
So they have multiple warehouse.. and 1 is in USA, meaning shipping will be quick?
I have never delt with dino direct personally, but from what I have heard from other members, they are about the same shipping time as all chinese warehouses selling cheap lasers, around 2-3weeks, ten days at the minimum.
EDIT: I went to the link and from the looks of it, I stand with my previous formulated opinion that this is probably a crappy laser. The site quotes 100mW, and I am guessing it would be lucky to reach the 50mW you mentioned. Also, even if it did reach 50mW, I am sure some of that will be IR since almost no pen lasers have IR filters. I hope that answers most of your questions!