DDL -> Do a nice PCB. Images + PDF

[Fred_DASP]

I did a PCB for me and decide leave here for you too.

Some photos and the image to termal process PCB

 

[Fred_DASP]

Re: DDL -> Do a nice PCB. Images here

+ 3

 

[Fred_DASP]

Re: DDL -> Do a nice PCB. Images here

(sorry... I don´t know how attach more than 1 image per post. )

Here the image.

 

[pwnstar]

Re: DDL -> Do a nice PCB. Images here

Nice! looks good man.
=P
did you design that layout of the board?

 

[chido]

Re: DDL -> Do a nice PCB. Images here

Very nice, but in the second pic I saw you used two capacitors, there's no need to use two. One is enough.

 

[Fred_DASP]

Re: DDL -> Do a nice PCB. Images here

pwnstar, yes dude. I used Eagle (cadsoft) and a little photoshop.
Childo: You r right and I know too... I welded the capacitor before of this board, and to to test the board, i welded it there temporily.

Tomorow I´ll post a pdf ready to print.

Here is the pdf: http://design3dmv.com.br/misc/DDL_FREDASP.rar

 

[Fred_DASP]

No one did it?

 

[Switch]

Few people have their board etching material ready.But don't worry , keep it here.Sooner or later someone with a DIY build will make the effort.

 

[hiperjp]

Fred_DASP, can you reupload the PDF please?

Thanks in advance!

 

[toked323]

I Have a circuit very similar to this except I use an smd capacitor and silicon diode.
BTW this looks nice and will help new comers you should make some and sell them.

 

[jake21]

if he does make and sell ill buy some

 

[laserbob]

Thanks I have been looking for a mask like this. I imported into Word and re-sized . When I printed it out the pin holes line up correctly for me. I saved it as a PDF and attached it to the post, hopfully it will scale the same, no guarantees but hope it may help others getting a trace for making a PCB. For some unknown reason I could not open fred_DASP .RAR file to get his PDF.

Bob

 

[pseudolobster]

[...]For some unknown reason I could not open fred_DASP .RAR file to get his PDF.
Bob

That'd probably be because this thread is two years old.

Normally, it's considered bad form to bump such old threads, but in this case, you've made a valuable contribution. Thanks! I've actually been meaning to etch some PCB's for drivers, and this helps a lot.

 

[laserbob]

Your welcome. This forum is Great! You never know where you answer may be, but with patience it will be found or answered here.

Bob

 

[TTerbo]

i always make PCB drivers

 

[Benm]

I usually fiddle around with experiments boards - but i dont make them by the dozen either. Its nice if you have time to do etching, drilling and all, but rarely worth it to me with these.