Commercial/Industrial quality Greenlee Digital Multimeter (DM810) - can do low ohms

[rkcstr]

SOLD!

I had been looking for a good deal on this meter because it has a low ohm range setting (shows down to 0.01ohm). I ended up with two, so I'm selling the other. The retail price on these is around $150-180.

When I got it, it was new in the package. I took it out to test and get pictures, but it is essentially brand new. Comes in packaging with test leads, instruction manual, warranty/certificate of conformity cards and a nice zippered carry case.

Get it for $75 shipped to US.

Features:
-DC/AC current (500.0, 5000uA; 50.00, 500.0mA; 5.000, 10.00A)
-DC/AC voltage (50.00, 500.0mV; 5.000, 10.00, 50.00, 500.0, 1000V)
-Frequency (10.00-99.99hz; 999.9hz; 9.999, 99.99, 125khz)
-Resistance (50.00, 500.0ohm; 5.000, 50.00, 500.0kohm; 5.000, 50.00Mohm)
-Capacitance (50.00, 500.0nF; 5.000, 50.00, 500.0, 9999uF)
-Display: 5000 count
-Measurement category - CAT IV, 600V per IEC-61010-1; CAT III, 1000V per UL 3111-1
-True RMS
-Autoranging
-Selectable Auto Off
-Low battery indicator
-Low ohm calibration to subtract test-lead resistance
-Frequency measurement in voltage and current modes
-Data hold to capture measurement
-RS-232 capable, connection to PC via optically isolated interface

Pictures:

 

[rkcstr]

I'm reviving this item for sale. I'm open to offers.

I use these to set current on my drivers by measuring setting resistance since they can measure low ohms. Much simpler than soldering or connecting up a load and power source.