- Joined
- Apr 29, 2007
- Messages
- 1,076
- Points
- 0
Hey All, up for sale here is a Coherent LM-30V 30W thermal power sensor. It's new from calibration. It was calibrated just over a month ago on 4-8-09 so it is good for a year from then. The detector has not been used since it was recieved. I was not the one to send it to callibration, I bought it from someone who had it sent. Strangly enough, he only had the documents from when it was bought new in 2004. It sat on a shelf and was never used since then so it is effectivly a new sensor.
In addition to the sensor, you also get a replacement absorber kit incase you manage to pull a lasernerd and scrach the detector
The sensor is NOT scrached and will not be when you recieve it.
I believe the sensor will measure down to a milliwatt, but I have not tested it. My old LM-30 measured to 10mW so I don't know if they improved them or not
Additionally, the sensor is position sensing so it can can record beam location and drift with the correct Coherent Meter. This is compatable with any Coherent meter using a smart sensor connection (the 25 pin connector)
This sensor was $1250 new and the callibration costs about $200. I would like to get $550 for the sensor with the detector replacement kit and the callibration papers. I can guarentee that the sensor is working and has no scraches when you recieve it.
In addition to the sensor, you also get a replacement absorber kit incase you manage to pull a lasernerd and scrach the detector
The sensor is NOT scrached and will not be when you recieve it. I believe the sensor will measure down to a milliwatt, but I have not tested it. My old LM-30 measured to 10mW so I don't know if they improved them or not
Additionally, the sensor is position sensing so it can can record beam location and drift with the correct Coherent Meter. This is compatable with any Coherent meter using a smart sensor connection (the 25 pin connector)This sensor was $1250 new and the callibration costs about $200. I would like to get $550 for the sensor with the detector replacement kit and the callibration papers. I can guarentee that the sensor is working and has no scraches when you recieve it.
