Cannot locate diode in DVD Writer TS-H652

[SubSurge]

Hi all,

I'm fairly new to lasers and such. I just acquired a DVD writer today and disassembled it to find the burning diode(s)...however, I was only able to find and extract these four components, none of which look like the typical laser diode...the round metal housing with the three leads. I am attaching pictures of what I found. Am I missing something? I followed the typical instructions for extracting what I need, but what I need didn't seem to be there...

It's a 2007 model if that helps.

Thanks in advance!

 

[Blord]

Sometimes the sled don't have the 5.6mm can diode. They contain other format diodes like black square package. It is a hit and miss with the unknown sleds.

Nowadays the red diodes are very cheap. Buy the LPC-826 diode which have an output of 300-400mW.

 

[SubSurge]

Great, thank you very much! I will pick up a diode directly or try another burner. =)

Guess it's worth noting for posterity that this specific model does not have the diode needed for a project like this.

 

[BShanahan14rulz]

They work electrically just like the canned diodes, just they are harder to figure out how to mount. Basically, you want to have a good thermal path between the metal tab and your module/heatsink/host.

Here's some threads that may be of interest, similar diodes.

http://laserpointerforums.com/f50/flat-plastic-diodes-testing-44719.html
http://laserpointerforums.com/f50/flat-red-laser-diode-testing-2nd-phase-47044.html

 

[SubSurge]

Excellent, thanks so much! I never would have known how to find those otherwise.