Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

Camera users help me!

borgqueenx

borgqueenx

0
Joined
Jun 30, 2008
Messages
1,660
Points
48





Yes, the cap will fit into the filter nicely. I say this because I own a Nikon DSLR and have gone through many lens caps and filters.

It won't "snap" on but you'll need to squeeze the two sides to place it onto the filter.
It's a spring mechanism, so you'll need to squeeze the sides to detach it as well.

However, two problems I may see with this:
1. Hopefully there isn't a lot of reflection back into the projector or it might get damaged. But since it's multi AR coated, it should be fine.

2. How big is your projector aperture? Good quality filters do get pricey as the diameter goes up, so you might want to find a smaller one to save a bit of $$.

If reflections are a concern, the best camera filters are from B+W Schneider, but they are very expensive.

Good luck!
 
Yup, the Hoya filter isn't bad at all-- it's one of the best MCUV filters.

How big is the aperture? If you want the absolute quality filter, you could reduce the filter diameter so the price won't be so high and get a B+W filter.

Let me know how it works out!
Cheers.
 
Thanks, but the point is that i want to protect that glass...
So thats why i want to know if i such a item i linked fits.
 
You're welcome. :)

Thanks, love the OMG cat.
Spent a bit of time searching for a perfect GIF for this forum.

Cheers!
 
You must log in or register to reply here.





Back
Top