Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

brilliant, visible beam...

Metalmaze

New member
Joined
Sep 14, 2019
Messages
2
Points
1
Hello, I was hoping some people could educate me a little bit. If I'm after a very bright, easy to see beam, what wavelength would work best? Also, does a brilliant beam mean extreme heat? Or is it possible to get a nice visible beam without burning everything in sight?
Next, are there goggles that work for every wavelength, or is it best to wear wavelength specific goggles?
Could anyone maybe suggest a setup for a green (preferably) laser, very visible beam, least hazardous beam for heat and eye damage? Is it possible to have a visible beam that doesn't even require goggles? very curious. Thanks for any information you may have! -Paul
 





Encap

0
Joined
May 14, 2011
Messages
6,126
Points
113
532nm is the brightest visually. Is about 10X brighter visually than 445nm of the same mW output power.

If you want an excellent quality 532nm laser see: https://www.jetlasers.org/index.php?id_category=17&controller=category

You need good eye protection for any laser over 5mW. Get good laser safety glasses here: https://www.survivallaserusa.com/Safety_Goggles/cat1667093_1527285.aspx

Read up on laser hazards by output power level Class here: https://www.lasersafetyfacts.com/classes-menu.html
See laser hazard chart here: https://www.lasersafetyfacts.com/resources/FAA---visible-laser-hazard-calcs-for-LSF-v02.png

Burning: A laser beam has no temperature - there is no inherent "temperature" to a laser beam. Heat is the random motion of matter particles (atomic or molecular particles). A laser beam itself is not made of matter but of photons, which have no mass, thus a laser beam can have no temperature. "Heat" is caused by a laser beams energy being absorbed by a materials surface and turning light energy into heat energy.
"Burning": depends upon the ability of the target to absorb and convert the light energy of whatever wavelength to heat.
 
Last edited:
Joined
Oct 6, 2015
Messages
1,378
Points
113
All lasers require goggles all lasers over 1>mW are eye hazard unless you can find a 0mW laser the most visible would be 532nm and then 520nm it also depends on the mW, If this is your first laser the is a big responsibility!
 




Top