Hello, I am new here! I would like to ask which is the better way to focus one red 650nm and one blue 250nm beam together in one beam. What I know is that red is focusing after blue so I used a focal lens (1.5m) for the red beam. Thank you in advance!
LPF Donation via Stripe | LPF Donation - Other Methods
Links below open in new window
ArcticMyst Security by Avery
Best way to have blue and red colour in one beam
- Thread starter valia
- Start date
diachi
0
- Joined
- Feb 22, 2008
- Messages
- 9,700
- Points
- 113
dichroic mirrors
Dichroic mirrors are mirrors with significantly different reflection or transmission properties at two different wavelengths -- used e.g. for transmitting pump light through a laser mirror.
www.rp-photonics.com
Sounds like this ^^ is what you want.
Would also like to see pictures of these dye lasers, cause YAG pumped dye is awesome.
- Joined
- Jun 25, 2017
- Messages
- 349
- Points
- 63
dichroic mirrors
Dichroic mirrors are mirrors with significantly different reflection or transmission properties at two different wavelengths -- used e.g. for transmitting pump light through a laser mirror.
Sounds like this ^^ is what you want.
Would also like to see pictures of these dye lasers, cause YAG pumped dye is awesome.
Dichros are what you need, pbs are also fine if you don't have problems with orthogonal polarization.
Singlemode
