Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

How to Register on LPF | LPF Donations

8x diodes - Pioneer 8X Blu-Ray-- BDR-203 and BDR-S03 BDR-S03BK

M

markyorath

0
Joined
Jul 24, 2009
Messages
2
Points
0
hi all, just got these two sleds,Pioneer 8X Blu-Ray-- BDR-203 and BDR-S03
before i extract the diodes can anyone tell me the pin outs, are they the same as phr803t? has anybody experiance of both these models?

also, ive come up with a really simple way of making a ttl driver using just 1 lm317 , and 2 extra components....



my lasers...
blu-raynge-lasers--dark-smoke5units.jpg


blu-ray-at-club.jpg

blu-raynge-lasers-5units.jpg
 





The pin configurations for all blu-ray diodes currently known are the same as the PHR-803T. The BDR-203 burner is much more powerful than the PHR-803T and can be driven at higher current, though they're not as widely used because of price. Things you should look into are:

AR coated lenses for 405nM (JayRob's 405-G-1 lens mod)
Dave's 512mW BDR-203BKS
FrankoRob's graph of the 8X diodes so far

The scanners look really impressive, I'm guessing they're DIY?
 
thanks for that prompt help!!

as for lenses, ive ordered the o-like, axiz and 405g1 (from will at laser66.com)
dunno if jayrob gets the same lenses from will....?
whats this other one mentioned from luke, i think was the name

yes the systems are all diy, i sell and hire them here in uk
blue range lasers is my company name

ps i have nearly every type of blu-ray diode from the ps3, dt8011, phr803t, bd323, lg 4x, lg 6x, sfaw210, and now the two pioneer 8x diodes, and i have a laser bee, so maybe i can help with that all in one comparison thats been suggested by the guy with the tourch helmet ....
 
jayrob speaks the truth. His lens are precision made and they are HOT. (literally)

-Mike
 
Thats some good sled information... any chance that you've found a supplier? Is this sled layout the same for 6xs as well?
 
Meatball said:
Thats some good sled information... any chance that you've found a supplier? Is this sled layout the same for 6xs as well?
Click to expand...

I got in the BDR-S03 sleds and they either aren't actually BDR-S03 or that type of sled is crap... the blu ray's only measured around 140mW. Probably a 4x sled or something, all the information on the BDR-S03 showed it to be 8x though.... ( Pioneer Blu-ray Burner, 8x BD-R, BDR-S03-OEM )

I'm working to either to an exchange for the sleds with my supplier or I'll sell them all at way below cost... take a huge loss :(
 
They must have not sent the correct sleds... Or the information is not correct on the driver specs.

Bummer...
Jay
 
do you have a photo of the sled? Maybe we can compare it to one that came from a 202 Drive?

-SightFX
 
Last edited:
You must log in or register to reply here.


Back
Top