- Joined
- Nov 28, 2013
- Messages
- 123
- Points
- 18
I have deleted the contents of this OP out of concern for potential liability issues.
Last edited:
Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers
How to Register on LPF | LPF Donations
445nm in 2S Zoomie Host
- Thread starter ImA4Wheelr
- Start date
D
Deleted member 17304
Guest
I feel ya on being afraid of it. I rarely touch mine. It's just too much power, the same goes for my 532...
Still, good job on the build! I certainly couldn't do that myself
Still, good job on the build! I certainly couldn't do that myself
Last edited by a moderator:
- Joined
- Nov 28, 2013
- Messages
- 123
- Points
- 18
Thank you ZRaffleticket.
Do you have a budget recommendation for safety glasses for the 532? I have a 200mW 532 that I never used because I still need to get glasses for the IR part of the output.
Do you have a budget recommendation for safety glasses for the 532? I have a 200mW 532 that I never used because I still need to get glasses for the IR part of the output.
D
Deleted member 17304
Guest
Well I use the eagle pair goggles that always get advertised here.
Your DIY work is good enough that you can always just install the IR filter in the laser and get away with non-IR blocking goggles. Doesn't take much, even I could do it
Your DIY work is good enough that you can always just install the IR filter in the laser and get away with non-IR blocking goggles. Doesn't take much, even I could do it
- Joined
- Nov 28, 2013
- Messages
- 123
- Points
- 18
Thanks ZRaffleticket. I've seen those mentioned quite a bit, but I thought IR was around 800nm. I take it they are adequate though. I have a lot more reading to do before I ask questions.
My DIY knowledge doesn't extend to optics. The IR filter idea sounds good. I thought I read somewhere that they reduce burning power, but like I said, I have lot more reading to do before I ask more questions.
I'll check into both options. Thanks Z.
My DIY knowledge doesn't extend to optics. The IR filter idea sounds good. I thought I read somewhere that they reduce burning power, but like I said, I have lot more reading to do before I ask more questions.
I'll check into both options. Thanks Z.
D
Deleted member 17304
Guest
Whoops, linked the wrong pair.
These ones
The IR filter is a flat pane that gets installed right before the aperture. You won't lose much visible power, but you will lose most IR power.
These ones
The IR filter is a flat pane that gets installed right before the aperture. You won't lose much visible power, but you will lose most IR power.
sinner
0
- Joined
- Oct 27, 2011
- Messages
- 2,564
- Points
- 83
Wait till you own a 3Watter, Im still stoked that I have one. Everytime I use it it's pure joy and scary as hell. I never use my lasers with stupids arround too so you watch out for that aswell 
Good laser you made there! Have fun and protect the seeing balls!!!
Good laser you made there! Have fun and protect the seeing balls!!!
- Joined
- Nov 28, 2013
- Messages
- 123
- Points
- 18
LOL, Thanks Sinner. Will do.
- Joined
- Nov 28, 2013
- Messages
- 123
- Points
- 18
Ah, Thanks Z. It would be nice to have one high quality pair that covers most/all lasers. I sense in my future that my wallet will become $60 lighter (Actually $120, got to protect my wife's balls too).