Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

405nm diode dying?

Joined
Dec 20, 2014
Messages
8
Points
0
Hi!

This is the run of the mill ebay 405nm AAA powered "Chinese" unit

I took the module and board out to check, everything looks fine, lens has no smudges. After first 3 days of use I left it alone in working order. Then I come back and it the dot is quite dim, not a focused beam like before. I've cleaned the lens, tried adjusting it and fresh batteries, still dim.

When I was first fooling around with it I shot it at some phosphorescent paint both on a substrate and in the bottle, it does not appear to be exciting the paint nearly as much as previously (as an objective "semi scientific" method to eliminate the possibility that my eyes just adjusted to the brightness or something.

The other new green model I also purchased has perfect visible beam in dim light, the purple did previously albeit more subtle...

The dot appears to be about the diameter of a pinky fingernail from 1-2 feet away with a dark spot in the middle. Focusing changes on the lens make no difference in overall brightness either, just diffuse it more.
 
Last edited:





Be sure it's not the batteries. Other than that all I can say is its cheap Chinese crap! They have zero quality control on those, sometimes they arrive DOA and sometimes last a few days or you may get lucky and have it last for years.

Alan
 





Back
Top