Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

16mm module assembly question

M

mattfletcher92

0
Joined
Jul 22, 2010
Messages
54
Points
0
my question if about the diode-driver connection in this module, its fairly straigh farward where the diode and the module go in the module, but when you screw the metail piece over the diode there is quite a distance between the diode and the space for the driver, should i just get the diode into the module and solder the module as close as possible?

could anyone give me a link for harvesting the diode in the phr-803T sled? ive seen one before but cant find one now :(

pics below (600 x 800 as requested by morgan i belive ;) i used a quick resize site so all but one are just over 600 x 800)
the diode in the pictures is a 5mw red, not the 100mw blu ray that ill actually be using, im ordering it laser, im getting the sled on odic force and it also comes with an ir diode, does anyone know the mw rating of that diode?

thanks
matt

DSCF1810-1.jpg


DSCF1812.jpg


DSCF1813.jpg


DSCF1820.jpg


DSCF1822.jpg
 





Last edited:
thanks udanis! :)

and thankyou very much for the red/ir link :D

ive got a driver that supports red and ir diodes so i could make it so you can switch between the two!:D
 
Last edited:
You must log in or register to reply here.


Back
Top