Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

120 mW 635 nm C6, comes with accessories

Hiemal

Hiemal

0
Joined
Dec 27, 2011
Messages
1,443
Points
63
Hello all. It's been a while since I've posted anything on here.

But I need to do some cleaning and I haven't done much with lasers in the past few months so I figure I may as well as get rid of two.

The other one is a 635 nm laser build in a C6 host, lpm'd to 110 mW last time I had metered it.

http://i.imgur.com/CzH1TTN.jpg

Slight orange tinge to it compared to 650nm which looks more cherry red. Standard aixiz module but comes with aixiz red glass lens. No acrylics here. Also using my custom laser driver (elasti-drive)

Comes with a 18650 battery.

If you buy both together I'll throw in a battery charger too. The blue laser comes with a pair of red laser safety goggles too.

http://i.imgur.com/C26PeWB.jpg

$65 for the 635 nm.

I'll take offers but I'm pretty stern about these prices (trying to get a 3DS/2DS!) so yeah.

Shipping will be $5.20 for each laser in a flat rate mail box.

Thanks for looking!
 
Last edited:





Re: 1 watt 445 nm blue (MDXL host) and 120 mW 635 nm C6, comes with accessories

I take it the 635nm is a opnext single mode?
What's the driver set at on it, and is it diode with driver attached in module or is the driver separate on a pill?
 
Re: 1 watt 445 nm blue (MDXL host) and 120 mW 635 nm C6, comes with accessories

The 635 nm is a mitsubishi single mode diode. I unfortunately don't remember what the exact current setting on it was. It's more than likely close to 150 mA, though. I'm not one to overdrive my laser diodes. I can take it apart if you really want me to and measure it though.

It's not a driver on the pill, it's a separate PCB.
 
Re: 1 watt 445 nm blue (MDXL host) and 120 mW 635 nm C6, comes with accessories

What I meant about the driver was is it a driver diode combo from DTR where the module is housing the diode and the driver rather than leads coming off the diode into the driver.

And I thought the Mitsubishi diodes were multimode or is there a lower output single mode mitsubishi diode?
 
Re: 1 watt 445 nm blue (MDXL host) and 120 mW 635 nm C6, comes with accessories

Ohhh, no no. It's not a driver diode combo from DTR. They're both made by me completely.

There is a single mode Mitsubishi diode, yes. Lower output, like 110 mW ish.
 
Re: 1 watt 445 nm blue (MDXL host) and 120 mW 635 nm C6, comes with accessories

Oh OK thx.
 
Re: 1 watt 445 nm blue (MDXL host) and 120 mW 635 nm C6, comes with accessories

Bump.
 
Re: 1 watt 445 nm blue (MDXL host) and 120 mW 635 nm C6, comes with accessories

Bump, prices dropped a bit.
 
Re: 1 watt 445 nm blue (MDXL host) and 120 mW 635 nm C6, comes with accessories

Blue has been sold, Red one is still looking for a home. Remember it's a 635 nm NOT 650 nm!

It's about the same brightness (a little brighter) than normal LPC-826 diodes while being lower power, so it's safer to use, plus the beam is pretty visible when it's dark for a red!

Also does come with a battery charger too.
 
Last edited:
Re: 1 watt 445 nm blue (MDXL host) and 120 mW 635 nm C6, comes with accessories

I've dropped the red's price as much as I'm willing to go.
 
Re: 1 watt 445 nm blue (MDXL host) and 120 mW 635 nm C6, comes with accessories

I was not aware that 635 nm single mode diodes had dropped so much in price, and as such I have adjusted the price of the red accordingly.
 
I also have a 650 nm in a metallic mini host I could sell for $50 plus shipping.
 
Is that a stainless host or is it just metallic painted, hard to tell on my phone
 
It's a metallic mini, one of the hosts lazeerer used to sell. I don't know the actual construction but guessing from the weight I'd guess aluminum. It is anodized a slightly darker shade of grey.
 
Last edited:
You must log in or register to reply here.


Back
Top