Tiny Powerful Blu-rays!!!
Introducing one of the smallest and toughest Blu-rays since Igort's lasers. It measures 94mm in length, 16mm in diameter, and 110mW at the aperture. This new version features a smaller, more compact design, 2-piece aluminum construction, a flushed tail cap clicky, and a threaded modular heat sink to help dissipate the heat produced by the high-output diode. The design is small yet rigid, and has a heavy but very comfortable feel. The midsection has diamond cut designs to prevent slippage, but the wristband lanyard ensures it never gets too far out of reach. The beam is fully adjustable from 3 inches to as far as the eye can see. Each unit is meticulously and diligently crafted to perfection. Any parts maimed or damaged during the building process is scrapped and replaced with a new part.
The finished product is sure to impress even a non-enthusiast. Price is $215 shipped in the US. This includes the laser, 2 new rechargeable 10440 batteries, a charger, 2 glow-in-the-dark dust caps to protect the lens, and compact blue storage case.
The input current is set to 110-115mA which averages 100-120mW of output power (depending on the diodes), which will be tested using a laser power meter. As far as power settings goes, I can set it to whatever the buyer requires but do acknowledge that increasing the power will reduce the life of the diode.
Due to the fact that I cannot and do not know how long the customers will keep the lasers on continuously, I offer a full coverage warranty. What I will do is offer a 3 month initial coverage warranty. This means that if used properly ( [highlight]duty cycles, minimal abuse, no tampering/modifying,etc.[/highlight]) I will replace any defective component within the first 3 months at NO COST except shipping. This warranty will only cover the initial repair, anything after that will be at cost so take care of your laser!
Warning: These lasers are classified as 3B laser products. They are NOT toys! They can and will cause serious injury and/ or blindness. Do not point at people, animals, and especially any vehicles. I do not take any responsibility for your use or misuse of this product. You are liable for your own actions!
And with that I will leave you with some eye candy. Feel free to comment, or ask questions.
Heat sink
Introducing one of the smallest and toughest Blu-rays since Igort's lasers. It measures 94mm in length, 16mm in diameter, and 110mW at the aperture. This new version features a smaller, more compact design, 2-piece aluminum construction, a flushed tail cap clicky, and a threaded modular heat sink to help dissipate the heat produced by the high-output diode. The design is small yet rigid, and has a heavy but very comfortable feel. The midsection has diamond cut designs to prevent slippage, but the wristband lanyard ensures it never gets too far out of reach. The beam is fully adjustable from 3 inches to as far as the eye can see. Each unit is meticulously and diligently crafted to perfection. Any parts maimed or damaged during the building process is scrapped and replaced with a new part.
The finished product is sure to impress even a non-enthusiast. Price is $215 shipped in the US. This includes the laser, 2 new rechargeable 10440 batteries, a charger, 2 glow-in-the-dark dust caps to protect the lens, and compact blue storage case.
The input current is set to 110-115mA which averages 100-120mW of output power (depending on the diodes), which will be tested using a laser power meter. As far as power settings goes, I can set it to whatever the buyer requires but do acknowledge that increasing the power will reduce the life of the diode.
Due to the fact that I cannot and do not know how long the customers will keep the lasers on continuously, I offer a full coverage warranty. What I will do is offer a 3 month initial coverage warranty. This means that if used properly ( [highlight]duty cycles, minimal abuse, no tampering/modifying,etc.[/highlight]) I will replace any defective component within the first 3 months at NO COST except shipping. This warranty will only cover the initial repair, anything after that will be at cost so take care of your laser!
Warning: These lasers are classified as 3B laser products. They are NOT toys! They can and will cause serious injury and/ or blindness. Do not point at people, animals, and especially any vehicles. I do not take any responsibility for your use or misuse of this product. You are liable for your own actions!
And with that I will leave you with some eye candy. Feel free to comment, or ask questions.
Heat sink