Miya
0
- Joined
- Aug 17, 2018
- Messages
- 112
- Points
- 28
This diode is durable 
If want to make it in a flashlight. i recommend Flex V.5 driver less than 1.1Amp current set and 18650 one battery
if want Pen type.. R200 Chinese driver 1amp fixed current
Chinese driver Note !
Provided by default R200 + R470. they are said this is 1.6w ~ 2w output
R200 + R470 = 1360ma
R200 one = 980ma
R470 = 480ma
this is more information
i think personally.. Flex drive is better for !
R200 Chinese driver output current goes down slightly (980ma -> 975ma -> 960ma)
Life is a challenge. I will make a 1.1A setting violet laser with a flashlight form
Nice dawn for walk.
If want to make it in a flashlight. i recommend Flex V.5 driver less than 1.1Amp current set and 18650 one battery
if want Pen type.. R200 Chinese driver 1amp fixed current
Chinese driver Note !
Provided by default R200 + R470. they are said this is 1.6w ~ 2w output
R200 + R470 = 1360ma
R200 one = 980ma
R470 = 480ma
Decent Chinese Driver
I've been experimenting with this driver quite a bit: The output current is controllable by adding or removing resistance at this point. It comes with an R200 resistor. I've removed it on one and simply bridged it with solder and got 4.5 amps out of the driver with 8.4 volts. It got hot...
laserpointerforums.com
this is more information
i think personally.. Flex drive is better for !
R200 Chinese driver output current goes down slightly (980ma -> 975ma -> 960ma)
Life is a challenge. I will make a 1.1A setting violet laser with a flashlight form
Nice dawn for walk.
