Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Search results

  1. CuratomLasers

    Sorry for the delay, haven't been on for a long time. Thank you, i thought the same when i saw...

    Sorry for the delay, haven't been on for a long time. Thank you, i thought the same when i saw it. Would love to be able to do that in a isolated place.
  2. CuratomLasers

    Bad to keep laser pointer running?

    Your laser most probably has excess IR laser radiation, so follow laserbee's advice and be careful, your laser is most definitely a Class IIIb due to the amount of 532nm and 1064nm radiation passing through. As for duty cycle, it is always safe to have one even for low power lasers, just so you...
  3. CuratomLasers

    !!! 3 Watt BIG BOY single diode blue laser 3X18650 !!! ULTRA HEAVY PICTURES !!!

    It should be but for some reason the divergence seems to be pretty good, The M140 appeared to have a divergence of 2.75mRad roughly (at best, wasn't easy to focus/collimate), but although untested due to time issues, it seems to be a lot better. The beam seems like it has a 4mm fast axis, and...
  4. CuratomLasers

    !!! 3 Watt BIG BOY single diode blue laser 3X18650 !!! ULTRA HEAVY PICTURES !!!

    Thank you in that case it is 5mm x 2 mm at 1.5mRad. But i am sure that the the M140 divergence specs were higher, and far more recognisable as a multimode line with a vast and wide fast axis. Was this just the G-2 lens? And is the G-1 lens even worse for divergence?
  5. CuratomLasers

    !!! 3 Watt BIG BOY single diode blue laser 3X18650 !!! ULTRA HEAVY PICTURES !!!

    May I ask, what is the beam specifications on this laser. I need to know the beam height and width (Line if like M140 diode), and divergence of both axes. I am trying to work out exactly how much more effective this laser would be compared to my 0.75W Arctic S3.
  6. CuratomLasers

    !!! 3 Watt BIG BOY single diode blue laser 3X18650 !!! ULTRA HEAVY PICTURES !!!

    Re: 2.8 Watt BIG BOY single diode blue laser 3X18650 !!! ULTRA HEAVY PICTURES !!! Well Done on your build, I agree with eytyxhs, you overpowered your LPM with a Filters. Your 2.8W result was the highest you could of got with your LPM and filters. '2.00 * 1.41 = 2.82W' I have heard that you...
  7. CuratomLasers

    What won't a 2W 445 wont burn?

    @EliteFunk Powder Coated Steel would work nicely, i put some in a laser cutter to engrave the coating off. It looks a lot more professional than engraving wood and plastics.
  8. CuratomLasers

    O-like.com

    Do O-Like lasers meet the specification or do they come underspec? Also, what do you suggest i do with my Wicked Arctic S3 1W, i bought the laser a while ago before Wicked Lasers guaranteed the power output. I don't think it is fair that new customers are purchasing the same product for the same...
  9. CuratomLasers

    Removing my intellectual property

    Re: Proof that the 50W CW FAP800 exists I have a FAP-I FAP800 50w, i have yet to buy a driver for it though, but i am going to make three dpss-fd attachments to it though. 532nm 473nm 671nm The FAP800 is integrated and has the TEC built in. I bought it from ebay, for around £120 but i did have...
  10. CuratomLasers

    UK Modified 1mw LASER, Great Fluke!

    Thank you, i now worried of damging the product. If you disconnect the two wires, does it drain the batteries more? :thanks
  11. CuratomLasers

    UK Modified 1mw LASER, Great Fluke!

    How did you get the lens cap of? I want to be able to clean the lens without just moving dust around.




Top