Search results

egg timer dinner bell

That pretty much says the diode is toast. You did see a spark when the tail cap was put on, so there must have been a short somewhere. Hooking it up the way you just did takes everything out of the equation but the Diode/Driver/Batteries, and since the driver is fine on the test load the...

I didn't see where He said the diode was already removed. It's also in the realm of possibility that YLOD is because the 405 burnt out. He can order a new SLED from PSBOY for less than $30.00, and if that is the problem playing with the bad one certainly could be interesting practice.

Flying Saucer toy attached to it's launching pull handle

CrossOut What is "red UV" (you mean a Red & a UV I guess) and You won't be able to see the IR at all. Let Me see that means You will have a 2 color Laser "IF it's hooked up correctly" outputting at the most 5mW of 660nm and 405mW which is about as exciting as a Frog Fart. Danoroth repairing the...

Anything in the 20mW-50mW range will be visible at night. You will be hard pressed to find anything over 5mW in a brick and mortar.

try the direct driver hook up and see what happens Batt to driver +/- Driver to LD +/- if all else fails send the diode in the module to DTR or myself. I do have both presses for diodes.

No They can go Dark as well bypassing the LED state. Can you try putting the diode in a different module? Try hooking up the battery plus and minus to the driver input, and hooking the LD+ and LD- without using the heatsink as the negative path.

No You can't. You might see the beam in the dark with some smoke in the air.

I would love the opportunity to meet Sam at SELEM...:bowdown:

I thought that as well, but He said it's just like your picture. So I thought it was just an oversight on jake's part not mentioning it.

You don't have a variable voltage and current power supply do you? If you by chance do you can run the diode off the PS, and know for sure the diode is good. Do you still have the flex or did you use it in another laser?

Possible bad driver? this is very strange. I'll have to think on it a bit. If you got a spark just by screwing on the tail cap you have a short in your host somewhere.

Take the side clicky apart, and see if the plastic gear is ok. I had a member ship Me their hotlight to fix, and it was the switch. It was a PITA to figure out as everything worked out of the host, but not assembled. Hope this helps some.

Dave is in CA..So shouldn't that be a Taser? Seeing as it's not a handgun friendly state.:whistle:

pump to remove air out of bottles.

spinning top

I did think that, but somewhere I read here that only blues would be supported, and not any of the reds. I really was hoping that the switch was functional as I've yet to try it out. I'll be assembling a 405, 445, and an 826 this weekend, so it will get a work out.

IV needle lock

Child proof cabinet lock