Search results

HEY DJNY, The ti B hosts are available now and see the pics here. These first models are only in 445nm and 405nm 300mw now and jetlasers is sorting out a reasonable prices at the moment. They are not waterproof now and we would upgrade them to water resistent later. It might take a while...

Thanks! Glad that you are happy with this mere laser pen. A single 10440 battery suffices to power this ti red laser pointer, so the back-up battery compartment will be put aside. A shame is that it's not focus adjustable, so the 100mw or 200mw output power cannot burn anything. It's just a pen...

I don't think the roundness of the beam profile has anything to do with the beam expanders used? :) Anyhow, 10x beam expander are available now and promises a better but sure bulky design. :) Pics to come:

Thanks Hak and the laser is so flattered to be tested upon three meters. :gj: I found Alpha responds kinda a lot slower than other meters coz it usually takes quite a while to rise to the stable power level. Thanks again and jetlasers is also checking some returned 532nm lasers and hope to...

Hey my friend, thanks a lot for your kindness and understanding. I've been much sorry about the inconvenience caused by the failing 405nm 800mw and there's a lot to improve on the driver! Hope we get things more smoothly asap. Take care!

Re: `jetlasers gb #4 is now on!!!!!!!!!!!!! Hope everyone is doing great. Now the focusing part of 405nm and 445nm are repaired and working well, so just don't worry about the focusing issue though the output power for 405nm is 500mw and 1w for 445nm. The price of all PL-C lasers drops a bit...

Great pics! I wish to buy all of them. :D Good job, Hak and DTR. You're the best.

Hey man, we've shipped out the returned lasers to our shipping agent yesterday and hope to get the tracking info very soon. Your 445nm is replaced by a 1w unit, :) Thanks all for the patience and kindness. At least now the focusing function works well now for all 405nm and 445nms. Though the...

Re: `jetlasers gb #4 is now on!!!!!!!!!!!!! Hope everyone is doing great there. Sorry that the 589nm yellow is not available on the GB4 and i'm not much sure if our techs can work on it for the time being. Speaking of the 405nm, as what we all have is the 10x 405nm sleds and the diode can only...

Hey Jaxz, i would ask Alex to pay you the rebate very soon. Hak would handle other rebates, either covering the shipping or paying back. Sure jet lasers need pay back first. Thanks Hak. Thanks Corbin, jedirock and Bobby! Regarding the ti laser pen, a single 10440 is enough and it takes...

Really appreciate your info on batteries and i would see if we could ship some batteries, 18650s and cr123s(16340) to you for back-up uses separately. It's really jetlasers' fault to change the battery. Thanks!

Re: NEW THREAD--JETLASERS GB #4 Feeler Hey JackGT, Sorry that we could not get a 300mw in the ti laser pen. Even 250mw is kinda difficult. :). Yes, they're ir filtered. We might go ahead with lowered power version such as 100mw or 150mw, surely at a better pricing for GBs. :o

Hey Bobby thanks a lot for your kindness and patience. The ti laser pens are on the way coz we shipped the PL-Cs separately. Please prepare the 10440(rechargable AAA) for the end. A single one is enough. It takes seconds' warm-up. Thanks again! Thanks Phi. It's been long and sure we dont want...

Thanks for all your kindness, buddy!:beer:

Thanks Hak, Andrew, aryntha and everybody! You've been so sweet. :) Yes, the pics speak for themselves, while my nonsensical point seems to be pretty vacant. But i did try to explain something as the future reference, just in case... I would like to have those no-good lasers back and trace the...

Hak, Thanks a lot! We deeply apologize for any further delay if these 405nms need to be readjusted. Every lasers' focusing route doesnot have to be exact the same. They dont have to be set at the aperture at default. Not every laser requires the user to turn the focusing mechanism to the end to...

Understood. I bet. Thanks.:) Hey Andrew, If you are not particular about the rounded shape beam, this 900mw+ 445nm might not be that bad. As we have seen wickedlasers' 1w 445nm and other 445nm products, the beam are all kinda rectangular. This would be times more evident if they are also focus...

Hey aryntha, You mean the diode life or the duty cycle? For 405nm, we use the extracted diodes out of SF-BW512P SLED, while for 445nm, we use the A140 diode from Hak. :) This GB3 is not all over yet since you havenot received the laser yet and there are several problem to solve for these lasers...

Hey guys, thanks for all your patience and understanding for this GB3 which has been delayed for nearly a century ever since. Thanks to Hak's help, it finally got shipped and delivered. :) But I need clarify something on these 405nms and 445nms before you receive the one you paid for. We deeply...

Hey man, the beam profile of PL-C 445nm is not rounded and the focusable features that enables us to adjust the beam size much bigger would highlight the rectangle shape of the beam spot a lot more, so Hak and I feel obliged to inform you of this first. I will explain more later. Thanks!