Search results

Re: GITD Laser Shirts AGAIN! Yep sure can! My long sleeve is without the back design too.

Re: GITD Laser Shirts AGAIN! Updated Sizing Charts! Apparently they have SLIGHTLY changed in the past couple years, but I wanted to make sure you had the latest. Also notice that I added Long Sleeve Tees to the list! I have a Long Sleeve of this design in a stone blue color... and I LOVE it!

Re: GITD Laser Shirts AGAIN! Regular Polo is: 6.1oz High Density 100% Cotton Welt Knit Collar resists curling Wood tone buttons 3 Buttons High Quality Polo 6.2oz 100% Pima Cotton Flat Knit Collar and Cuffs Pearl Buttons Side Vents 3 Buttons Those are the "On paper" differences. These regular...

The Addicts design is a front only design. Nothing on back. I would have to run a separate GB for a different design... but running the two at the same time (which I have done once) tends to keep the lists from getting completely full for either GB. I don't know... I suppose I could just put...

Re: GITD Laser Shirts AGAIN! Good deal - Updated the list.

I tried doing that, and there was lots of interest, but no one submitted anything. What I would REALLY love to do, is just get a bunch of designs done and concurrently just have a sort of waiting list. When it fills up, we order. And just have ongoing group buys for them.

Re: GITD Laser Shirts AGAIN! For the most part, the hoodies fit as you would expect it to: if you wear a medium in most things, then a medium will fit great. I had a medium... but then my wife stole it from me and took in the seams to make it fit her. haha cheeky chick.

You got it buddy! I set up a new GB. I've decided I'm not cancelling this due to any lack of interest if there is a lack. I'm running this until it fills up. :)

First of all, a HUGE THANK YOU to those of you who have shown interest in this. We've had a handful of fantastic runs of these designs and I gotta say... they are my favorite shirts and hoodies in my closet... honestly... haha I've received a few questions and some prodding, so here we go. This...

I think it is time for another run... If there isn't enough interest in this classic design or the Addicts design, I might have to work another design (I know... I've been saying this for over a year now.. haha) I'll post a new list in the GB section. Thanks guys! Just set it up.. :) Here's...

Agree with RHD. Having pulled cells from laptop packs, buying the crapfire, and legit sony, panasonic, or samsung; paying $6.30 for a GOOD new cell is well worth it. You've already spent so much on your laser, why not give it the good nutrition it deserves? :) The old used cells are great for...

I was thinking those would do the trick. I'll have to get a pair and post back if it gives me the current my driver is set for. Thanks :)

I currently have some 5W and 10W 1Ohm resistors, but the idea of using a .1ohm always sounded good to me. The regulator should have a forward voltage of .75V @ 3A, and the 445nm we always test to run around 5V, although I think it actually runs at 4.5V. I should need a minimum of 6V to lase, and...

one more thing I need to clarify... is it correct that if using a linear regulator, two old and used 18650s will not be able to supply more than about 1A of power? But the new high discharge batts should be able to do that, right? Is it possible to use just one high discharge batt for 1.9A...

Hmm... may be. In fact, I think you're absolutely right. I didn't think of that before because I've run things at 3A+ before, but the input voltage and output voltage was closer... NOW, my regulator is dropping about 7V at 1.9A from my 12V source. duh... haha I really need to get a variable...

I have an M140 wired up to a 1.9A linear LT1185 current regulator. Turns on and is on as it should be. nothing out of the ordinary, but I recently got a Radiant X4 LPM and measured it. The weirdest thing happens: It ramps up to just over 1000mW, and then just as quickly as it went up (about 20...

Windows 8... I did, but after re-checking, I see they didn't take for some reason. EVERY time I get windows updates, it screws my computer up until I reboot again after it has rebooted. :p Reinstalled through the device manager. CONNECTS! Just ran my first few tests! I tell you, this is my...

Got the meter today THANKS! Got it hooked up and did some tests without data-logging, works awesome! Now onto data-logging... Peregrine and Radiant both... simply don't see the meter. Can't connect to nothing. :( I've gone through the manuals and read through posts. The LPM was set properly...

Thanks for your input Won. This should - in theory - be fine with 18650s if they have 3Ah+ and a 2C discharge rating. I hooked it up this morning and played around with the resistors. Best I could get was 1190mA, so the batteries must be crapping out. I guess it's all a moot point if it is a...

Hey I came across this driver setup that has a very very low dropout. Their schematics show it hooked up to a lead acid battery, but based on the diagrams and specs, would this work with two 18650s in series? Could you pull up to 4A with this setup? The IC regulator LT1123 - Low Dropout...