Search results

The new OD6 pair will be good for what you have now and will work well with future higher powered builds. ;)

Well, the one that worked for me is the second one I sent you. ;) I can ask the vendor for the diode part number, but they are probably the same on all the units.

Thanks for the heads up and the fix suggestion, I've contacted our supplier (who is also an LPF member) to alert him of the issue. :beer: BTW the 20A load has worked normally in my testing of drivers ranging from well under 1A to 5A, and the results have correlated closely to those observed...

I'm pretty sure it will work with the tapered and extended heat sink on the S4, I recall a member posting a photo of theirs on the forum somewhere. It is about 1/16" smaller in diameter than the host, as long as that doesn't bother you. ;)

Per request, AW brand Li-ion and IMR 14500 batteries are now available on the US store. We will need to get some 14500 chargers before being able to offer them on the international store.

You will likely see little or no green but you should be able to see some fluorescence and/or emission of other wavelengths during burning.

Thanks guys! BTW, AW brand 14500 batteries (Li-ion and IMR) are on order and should be available soon. :)

Good point, thanks for mentioning that. :beer:

Yes, but you will have to trim the battery side wires and trim and re-solder the diode side wires to get everything to fit.

The lens material is plastic and the protective material is embedded in the lens, not a coating. The lenses will not be damaged by a brief exposure to laser light. ;)

Here are a couple photos of the new goggles:

Visually they are a little bit darker than the original. I'm waiting to receive a new OD vs. wavelength chart from EP.

Thanks RB, you almost cleaned us out! We have another shipment on the way that should be here in a few days.

Eagle Pair has discontinued the popular OD4+ 190-540nm slip over goggles and has replaced them with an OD6+ version. These will provide an extra level of protection for those high power builds! The standard 190-540nm goggles are still OD4+ for now, but apparently they will soon be offered in...

OP updated with yet more photos and text, and a link to Ricker's similar build thread showing the use of DTR's short copper module back half in his build.

Re: S4X Host Containing a NUBM44 W/ SXD Driver @ 4.5A (PIC HEAVY) Thanks, I'll put a link to your thread in the tutorial, as well as a few other photos showing the short back half being used in our SL-5 diode and driver module.

Re: S4X Host Containing a NUBM44 W/ SXD Driver @ 4.5A (PIC HEAVY) Awesome job and documentation Ricker, and I'm glad the tutorial helped! :beer:

Thanks Pman. We do what we can but the main reason we don't put more explanatory information on our US store is to comply with FDA regulations. As a business, we have to be concerned with that. For you as an individual, you can post anything you want. :) I think what you're doing is great and...

Yes, the code is still working. Be sure to click the "+" to apply it. ;)

14500 AW brand IMR and Li-ion batteries are a definite possibility on our next reorder.