Search results

After approximately 1 hour total use over a 3 month period! I'm going up a few hundred mw to 890mw in my Chrome mini. That's one great host with a jayrob Cu heat sink! More fun!

Hey Analogue Your meter is on its way Let me know when you get it Enjoy!

I had a problem with my 12x and Flamingpyro fixed it and he wanted nothing more than me to donate to the LPF so you thank him as well as I do, Thank you!!!!!! A good guy! Nospin

Yes I do, in stock red or blue

interesting results!

I have been fielding questions about drive overheating If you want the big watts with the Flexdrive it must be heatsinked! My build is described here in post #563 http://laserpointerforums.com/f65/merged-445nm-pictures-video-thread-51335-23.html

ARICHA Your meter is on its way They said 6 to 10 days Priority Mail Int. Let me Know when it arrives!

If it an electrolytic it will store energy and since there is not enough current for the diode to lase its now an LED drawing just a few ma so that's why it lasts a while

My tests show a similar drop in power due to diode heating

When I built my 1.5 watt 445 It flickered 15 seconds from the start! As I described in my post of the build, I guessed driver issue first and shot it with freon and it stopped, I turned it off, created my pill heat-sink and it NEVER flickered again. I never suspected anything else, look at the...

silicone thermal compound?

I doubt enough for over 1.5 watts My sink is huge

Look at post #563 This is how I did it, it might give you ideas on how you can http://laserpointerforums.com/f65/merged-445nm-pictures-video-thread-51335-23.html

You need to sink the driver my flex is maxed out and never flickers but it did before I sinked it to the pill

I want a pole pig and enough watts to drive it without blowing my meter

My V5 is maxed out 1.5 amps 4.35 volts >1.5 watts

Yes and on the final output at the diode I used the pill as a sink

Re: New 5 Watt Laser Power Meter archeometry Your meter is shipped priority mail today let me know when you receive it Thanks again!

I'm glad you like the meter Thanks again!

Here are all the specs on my 445 again why limit yourself on this diode by going with the Microboost A140 diode 1.5 amps at diode 4.35 volts 1.6 watts at 5 seconds 1.485 watts at at 30 seconds 2.25amps at 18650 battery 4171 host 405-G-1 lens Micro flex drive V5 about 35 min on time in 11 days