Search results

Wow rough shipping! The battery pack is no longer avalable any 12 volt positive center will work as it draws only 60ma I'm glad there are no problems, enjoy your new tool! Thanks again

No on the xformer, it is GFI protected I have been a busy beaver on my 6.6" secondary

If your form fits in the lathe its perfect! I do mine with a big drill on a variac and comfortable speed is 60 rpm

No just don't have the coils touching the wood and even up the spacing between turns, it will arc between turns

oh, if I do put that base of the TF in oil I believe a mineral oil can be used? I have read up on it briefly. Very cheap NON detergent motor oil is what I used

Perfect These are from a cutting board

Yea high voltage and wood never mix Cheap cutting board from target works great!

Nice work on the topcap, those bumps will be fine I just built mine 8x30, huge here are some pics

Plug and play, Worldwide! after starlight I have only 7 left

Sigurthr is right the gap needs to be close enough to start and then you need high flow right at the arc point otherwise it never quenches to open the switch and just power arcs most designs narrow down at the gap and then open back at the other side but you need high temp mounting of the...

That primary looks fine, I would use a sigle gap but you need more airspeed thru the gap, most narrow down to 1 to 1.5 inch at gap and use vacuum power Google: sucker gap tesla

1 MOT will work perfect on 120 volt and is good sized for your secondary

one microwave and your in, free! I made a 2.8kw coil with two I don't use NST's for a reason

Really? Lets hear about your SGTC?

Hey I have made a 4x18 a 6x24 and am starting a 8x30 all from Al dryer duct The steel one's will be rigid and thats good, My 4" one is steel pie pans Just attach the pie pans to each other, I used pop rivets, easy! drill a center hole stretch out the duct with two people, about 4 feet, now...

$299 Shipped USA

I have 10 of these meters left :D

Why don't you shoot for old broken microwaves That's the Biggest Bang for your buck! The MOT has scary power And the diodes and caps are practically bullet proof and they are what I used in my half wave rectifier in my coil I put an ad in a forum like CL and ended up with at least 8 and 1...

On your flyback is it the primary or secondary thats open?

Yes Flaminpyro that is my Museum quality TC https://www.youtube.com/watch?v=5XVRtoRkVW4 https://www.youtube.com/watch?v=_WqFPIJPgoI The first is a run with 18" fluorescent tubes is wood blocks to make it more interesting The second was one of the last runs in Mad Scientists lab before it got...