Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

5W 445nm labby from OdicForce: did anyone try it?

Joined
Feb 25, 2009
Messages
169
Points
18
This laser: 5W 450nm Blue Focusing Laser Module (12V) with TTL Driver - OdicForce

- I noticed the title says 5W, but the description mentions "4+W". So, has anyone measured its actual power with a meter?
- What are the dimensions of the driver? The picture only gives the dimensions of the laser head.
- The description says "normally on full power": does it mean it activates as soon as you connect its power supply to the electrical outlet?
- Can the driver be immediately connected to this kind of power supply? UK DC 12V 2A Power Supply Adapter 100-240V Input, 5.5mm x 2.1mm Connector - OdicForce From the pictures, I'd say "no", because it looks like the driver has just two loose wires you need to attach to a suitable connector, but I thought I'd ask just to be sure.
 





Joined
Sep 20, 2008
Messages
17,622
Points
113
The Laser should NOT come 'ON' if the TTL
input has 0VDC on it. It should come fully
'ON' when the TTL input has 5V on it.

That is if you apply the 12VDC to power the
Laser. The TTL input acts as a very fast
'ON/OFF' switch.

You can roughly guess the dimensions of the
Driver by knowing the dimensions of the Laser
housing.

As diachi said.. we would need to have the
Laser in hand to tests it's power.


Jerry
 
Last edited:
Joined
Feb 25, 2009
Messages
169
Points
18
The Laser should NOT come 'ON' if the TTL
input has 0VDC on it. It should come fully
'ON' when the TTL input has 5V on it.

That is if you apply the 12VDC to power the
Laser. The TTL input acts as a very fast
'ON/OFF' switch.
/googles "TTL"...
Aha, so that's what TTL is for. Okay, so the effective power of the laser would be the maximum power times the TTL duty cycle. Makes sense.

Do you think the circuit I attached would make a good power supply for that laser (in case I just want to run it at full power)? I already located components that are able to provide the necessary current.
Battery
7812 voltage regulator
7805 voltage regulator
 

Attachments

  • powersupply.png
    powersupply.png
    3.7 KB · Views: 50
Last edited:

diachi

0
Joined
Feb 22, 2008
Messages
9,700
Points
113
/googles "TTL"...
Aha, so that's what TTL is for. Okay, so the effective power of the laser would be the maximum power times the TTL duty cycle. Makes sense.

Do you think the circuit I attached would make a good power supply for that laser (in case I just want to run it at full power)? I already located components that are able to provide the necessary current.
Battery
7812 voltage regulator
7805 voltage regulator


...Why is the 7812 in there? It can't provide enough current. They're rated at 1A continuous, half the current that the driver spec says it needs. Even then, it's a very inefficient way to provide power. You'd need a decent heatsink on it even at 1A continuous.

Replace the 15V supply with a 12V switchmode supply (capable of >2A, I'd aim for 3A so you have some headroom) and then keep the 7805 to provide 5V for the TTL. TTL is high impedance, so you could even use a smaller regulator, although 7805s are cheap and easy to find.

Simpler yet, you could use a simple voltage divider to provide 5V from the 12V power supply, that'd be fine assuming the supply is decently well regulated.
 
Last edited:
Joined
Feb 25, 2009
Messages
169
Points
18
...Why is the 7812 in there? It can't provide enough current. They're rated at 1A continuous, half the current that the driver spec says it needs.
But I filtered components for maximum output current, I selected 2.2A and the results showed that component...
Simpler yet, you could use a simple voltage divider to provide 5V from the 12V power supply, that'd be fine assuming the supply is decently well regulated.
Would it work, though? If this is the voltage divider, then adding a load between Vout and ground would be akin to connecting another resistor in parallel to R2, so the actual voltage would depend on the internal resistance of the load.
 
Last edited:

diachi

0
Joined
Feb 22, 2008
Messages
9,700
Points
113
But I filtered components for maximum output current, I selected 2.2A and the results showed that component...


Check the datasheet, that's the peak current rating. You also need to take into account power dissipation for that specific package [(Vin-Vout)*Iout]. You'd also be better with a TO-220 package rather than a DPAK, just for ease of mounting/heatsinking/connecting.

Really though, there's no reason to use a 15V supply and a 12V regulator in the first place, just use a 12V supply. :thinking: :confused:
 
Last edited:

Encap

0
Joined
May 14, 2011
Messages
6,110
Points
113
- I noticed the title says 5W, but the description mentions "4+W". So, has anyone measured its actual power with a meter?
- What are the dimensions of the driver? The picture only gives the dimensions of the laser head.
- The description says "normally on full power": does it mean it activates as soon as you connect its power supply to the electrical outlet?
- Can the driver be immediately connected to this kind of power supply? UK DC 12V 2A Power Supply Adapter 100-240V Input, 5.5mm x 2.1mm Connector - OdicForce From the pictures, I'd say "no", because it looks like the driver has just two loose wires you need to attach to a suitable connector, but I thought I'd ask just to be sure.

The simple and more rational choice is to ask OdicForce your questions-they will be happy to answer any and all.
 
Joined
Feb 25, 2009
Messages
169
Points
18
The simple and more rational choice is to ask OdicForce your questions-they will be happy to answer any and all.
I bought a laser from them in 2014. Before buying it, I had emailed them with various questions, but they never answered. Thus, I mentally filed them under "quick to ship products, but they won't answer questions".
 

Encap

0
Joined
May 14, 2011
Messages
6,110
Points
113
I bought a laser from them in 2014. Before buying it, I had emailed them with various questions, but they never answered. Thus, I mentally filed them under "quick to ship products, but they won't answer questions".

S0 why did you buy it with no questions answered?

I don't understand your questions that after 3 years you can't comprehend, try, or get answers to.
Do you actually have the unit and power adaptor or are you just playing a game for attention?
All of your questions are as if you do not already own the product much less for 3 years nor have any common sense understanding of the product description on the web page?

They are not real questions -most of your questions are answered on the web page:
"This module has adjustable focus and optional TTL switching that can be used to control the power output (normally on full power, the TTL signal can be used to reduce the output power using PWM). 12V operation"
As for powering it -- it says you can use that 12V 2A Adaptor will power it so you buy also the DC Adaptor (Socket) 2.1mm Pin 5.5mm Diameter£1.25" also to be able connect it to the wires from the driver OR you can connect it to any other 12 2A or greater power source you want. The size of the driver? I assume in 3 years you could bother to measure the one you say you have---makes no sense at all.
PS the web page says 5000mW not 4+W

I assume the product came with instructions
In any case, Jonathan Swift has been responsive to other members recently--maybe give him another try by email or call him if you have any REAL questions that you can't answer easily yourself like the ones posted in the OP.
Address:
OdicForce
16 Adams Close
KT5 8LB Surbiton
United Kingdom
Phone" +44 (0) 777 5785574
Contact person: Jonathan Slater
Email : ofl@odicforce.com
 
Last edited:
Joined
Feb 25, 2009
Messages
169
Points
18
S0 why did you buy it with no questions answered?

I don't understand your questions that after 3 years you can't comprehend, try, or get answers to.
No, what I bought in 2014 was a 1W handheld laser, which now isn't being sold anymore (EDIT: this one). I wrote I bought a laser from them, not this laser.
My questions about that laser were about temperature and battery capacity, but then I decided that I could find out the answers by myself, so I took a risk and bought the laser. Yes, that laser came with instructions, which actually answered my questions (and the laser was a really fine product), but that doesn't help me with the labby this thread is about (and which wasn't even sold in 2014).
My confusion about TTL was due to reading a page of an unrelated labby sold by O-Like that claimed that the absence of a TTL signal caused the laser to work at full power.
(EDIT #2: there's even a driver sold by OdicForce that works like that: "This driver has optional TTL modulation: The output is on when the TTL modulation connector is floating ( not connected). The output is off when 0V is supplied to the TTL modulation connector and on when a TTL signal (5V) is supplied.")

I hope this cleared any possible misunderstanding.
 
Last edited:

Encap

0
Joined
May 14, 2011
Messages
6,110
Points
113
No, what I bought in 2014 was a 1W handheld laser, which now isn't being sold anymore (EDIT: this one). I wrote I bought a laser from them, not this laser.
My questions about that laser were about temperature and battery capacity, but then I decided that I could find out the answers by myself, so I took a risk and bought the laser. Yes, that laser came with instructions, which actually answered my questions (and the laser was a really fine product), but that doesn't help me with the labby this thread is about (and which wasn't even sold in 2014).
My confusion about TTL was due to reading a page of an unrelated labby sold by O-Like that claimed that the absence of a TTL signal caused the laser to work at full power.
(EDIT #2: there's even a driver sold by OdicForce that works like that: "This driver has optional TTL modulation: The output is on when the TTL modulation connector is floating ( not connected). The output is off when 0V is supplied to the TTL modulation connector and on when a TTL signal (5V) is supplied.")

I hope this cleared any possible misunderstanding.

OK clears some confusion---they are known for reasonable product. ---sounds like you have all the answers you need--if not contact them ---am reasonably certain they will answer--or call Jonathan and discuss anything not clear

Good luck
 
Joined
Jul 10, 2015
Messages
9,799
Points
113
It does not say what diode is in it, just that it's a N--- company diode.
 




Top