- Joined
- Apr 26, 2010
- Messages
- 4,175
- Points
- 83
How lengthy is your project list? Hmmm? Mine is actually quite extensive, and includes:
A LARGE collection of Krytons of all different colors (anodizing) and marble and fade designs, in a large pelican case with slots removed and holes drilled in the foam for spare batteries. As well as 2 VERY special ones, a polished Kryton Smooth that will eventually (fingers crossed) hold one of the new 510 diodes, and a Groove 1st gen with whatever new color breakthrough comes after that (really want SOMETHING between green and red, like the 560-610 range.) Also, 4 of these will be the "Masters" A blue, red, green, and violet "master"
A green and black marble with Fiddy's green GITD strips and O-rings, and a 500mW module harvested from an O-like laser.
A blue and black marble with a high WL H1600 (450+) and more of Fiddy's GITD
A red and black marble with a 635 binned for efficiency, with more GITD
A purple to blue fade with black marble with a binned 12X (hoping for a WL bin) and more GITD
A handful of labbies. 2 magentas, one with a 405/660 combo, another with single mode 450/635. A cyan labby, a yellow one (even though I don't feel to excited about a yellow mix) and an RGB unit.
Some knife edging once I get enough spare time and money to do this project.
A few PBS labbies. So ~1.25W of 405, 1W of 660, 1.8-2W of 635, etc.
A homemade DPSS system
More gas!
And I'm sure there's more that I've said "Oh! I wanna do that!" to, but they're slipping my mind at the moment.
SO! What plans do ya'll have? How extensive is your to-do list? I'm interested in ya'll's answers!
A LARGE collection of Krytons of all different colors (anodizing) and marble and fade designs, in a large pelican case with slots removed and holes drilled in the foam for spare batteries. As well as 2 VERY special ones, a polished Kryton Smooth that will eventually (fingers crossed) hold one of the new 510 diodes, and a Groove 1st gen with whatever new color breakthrough comes after that (really want SOMETHING between green and red, like the 560-610 range.) Also, 4 of these will be the "Masters" A blue, red, green, and violet "master"
A green and black marble with Fiddy's green GITD strips and O-rings, and a 500mW module harvested from an O-like laser.
A blue and black marble with a high WL H1600 (450+) and more of Fiddy's GITD
A red and black marble with a 635 binned for efficiency, with more GITD
A purple to blue fade with black marble with a binned 12X (hoping for a WL bin) and more GITD
A handful of labbies. 2 magentas, one with a 405/660 combo, another with single mode 450/635. A cyan labby, a yellow one (even though I don't feel to excited about a yellow mix) and an RGB unit.
Some knife edging once I get enough spare time and money to do this project.
A few PBS labbies. So ~1.25W of 405, 1W of 660, 1.8-2W of 635, etc.
A homemade DPSS system
More gas!
And I'm sure there's more that I've said "Oh! I wanna do that!" to, but they're slipping my mind at the moment.
SO! What plans do ya'll have? How extensive is your to-do list? I'm interested in ya'll's answers!
Last edited: