- Joined
- Jun 8, 2011
- Messages
- 141
- Points
- 0
Hello,
I have two kinds of Ajustable mounts.
LS-XY002 & LS-XY003
LS-XY002:25USD adjust it with tool
1. Concrete steps:
1. Loose setscrew of X, Y and then adjust mirror socket to suitable
position by X, Y adjustable screws.
2. Adjust Z adjustable screw at same time.
3. Fix X, Y, setscrew.
NOTE: Made sure all beams through adjustable mirror socket be
one point when you adjust X, Y, Z line with adjustable screw.
LS-XY003:25USD adjust it with hand directly
Characteristics
This type Mirror mounts are capable of biaxial θx and θy, θz designed for holding mirror, beam splitter and other optics
Reduce incident angle & minimize beam distortion
100-pitch adjustment screws very fine adjustments.
Can be mounted directly on breadboard
I have two kinds of Ajustable mounts.
LS-XY002 & LS-XY003
LS-XY002:25USD adjust it with tool
1. Concrete steps:
1. Loose setscrew of X, Y and then adjust mirror socket to suitable
position by X, Y adjustable screws.
2. Adjust Z adjustable screw at same time.
3. Fix X, Y, setscrew.
NOTE: Made sure all beams through adjustable mirror socket be
one point when you adjust X, Y, Z line with adjustable screw.
LS-XY003:25USD adjust it with hand directly
Characteristics
This type Mirror mounts are capable of biaxial θx and θy, θz designed for holding mirror, beam splitter and other optics
Reduce incident angle & minimize beam distortion
100-pitch adjustment screws very fine adjustments.
Can be mounted directly on breadboard
Last edited: