Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Wiring a AC brick for HeNe Laser

Joined
Apr 5, 2012
Messages
2
Points
0
Hi fellas,

I picked up one of these the other week:
VhcQh.png


The wiring on the input of the power supply has me rather confused, as I've only dealt with DC power supplies before. Could someone enlighten me on how I'm supposed to wire up the 2 white and green wires? The AC brick on Sam's FAQ has quite a few more wires than this one!

-thanks
 





Joined
Sep 20, 2008
Messages
17,622
Points
113
If the input is 120V AC... and not DC then connect the
2 White wires to the 120VAC.
The Green wire is to be connected to the 120VAC Ground
pin.

Jerry
 
Joined
Apr 5, 2012
Messages
2
Points
0
Ahh right, thanks! ...For some reason I was expecting a more complicated solution..
 




Top