Toaster
0
- Joined
- Aug 4, 2010
- Messages
- 1,249
- Points
- 0
I made a proper test load and using my little driver from Aixiz lasers ebay accout. I can only turn the pot from .1 mV to 2.5 mV, what is wrong, I have had this issue with 2 drivers.
I am using aW 18560
4 1n4001 and 1 1ohm. If you know why this is happening, please share, thanks
I am using aW 18560
4 1n4001 and 1 1ohm. If you know why this is happening, please share, thanks
Last edited: