[LC version of this post]
Well, I finally decided to take pictures of the designs that my spirograph can make. I change the design by changing the direction of one mirror and the voltage of the other. The designs are always consistent too! The pictures you see here are the few that came out looking good on my camera. Pictures are linked bacause they are so damn big.
-=1=-
http://img168.imageshack.us/img168/264/dscn1880wk3.jpg
-=2=-
http://img168.imageshack.us/img168/2261/dscn1881gr8.jpg
-=3=-
http://img168.imageshack.us/img168/5648/dscn1882wl4.jpg
-=4=-
http://img168.imageshack.us/img168/5624/dscn1883fm9.jpg
-=5=-
http://img168.imageshack.us/img168/1047/dscn1884gm3.jpg
-=6=-
http://img168.imageshack.us/img168/2465/dscn1885ls0.jpg
-=7=-
http://img168.imageshack.us/img168/8149/dscn1886gx3.jpg
-=8=-
http://img168.imageshack.us/img168/6968/dscn1887fl0.jpg
-=9=-
http://img217.imageshack.us/img217/7459/dscn1894al4.jpg
Here is a video where I switch through every mode. It looks odd because the laser moves to fast for the camera to capture it properly. You should be able to pick out some of the designs from the pictures above.
[YouTube] (crappy vid )
This was made with a 2 mirror system. I started working on a 3 mirror version, which required my to take a part the 2 mirror one.
Well, I finally decided to take pictures of the designs that my spirograph can make. I change the design by changing the direction of one mirror and the voltage of the other. The designs are always consistent too! The pictures you see here are the few that came out looking good on my camera. Pictures are linked bacause they are so damn big.
-=1=-
http://img168.imageshack.us/img168/264/dscn1880wk3.jpg
-=2=-
http://img168.imageshack.us/img168/2261/dscn1881gr8.jpg
-=3=-
http://img168.imageshack.us/img168/5648/dscn1882wl4.jpg
-=4=-
http://img168.imageshack.us/img168/5624/dscn1883fm9.jpg
-=5=-
http://img168.imageshack.us/img168/1047/dscn1884gm3.jpg
-=6=-
http://img168.imageshack.us/img168/2465/dscn1885ls0.jpg
-=7=-
http://img168.imageshack.us/img168/8149/dscn1886gx3.jpg
-=8=-
http://img168.imageshack.us/img168/6968/dscn1887fl0.jpg
-=9=-
http://img217.imageshack.us/img217/7459/dscn1894al4.jpg
Here is a video where I switch through every mode. It looks odd because the laser moves to fast for the camera to capture it properly. You should be able to pick out some of the designs from the pictures above.
[YouTube] (crappy vid )
This was made with a 2 mirror system. I started working on a 3 mirror version, which required my to take a part the 2 mirror one.