Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers
Buy Site Supporter Role (remove some ads) | LPF Donations
Links below open in new window
FrozenGate by Avery
Screwey specs???
- Thread starter KungFool
- Start date
Sigurthr
0
- Joined
- Dec 11, 2011
- Messages
- 4,364
- Points
- 83
What diodes were they (wavelength and output power are sufficient).
That means you need less than 60mA and more than 2.5V to power them; looks like a low power red or infrared.
Where you bought it from will help as well, they kind of look like Laserlands specs. I've bought their 50mW diodes which are listed with similar requirements but actually need >3V and ~80mA.
That means you need less than 60mA and more than 2.5V to power them; looks like a low power red or infrared.
Where you bought it from will help as well, they kind of look like Laserlands specs. I've bought their 50mW diodes which are listed with similar requirements but actually need >3V and ~80mA.
- Joined
- Sep 20, 2008
- Messages
- 17,635
- Points
- 113
Looks about right to me... You haven't even supplied
the wavelength of the Laser or even a link... That is Screwy...
I would assume that it was a Red or IR Laser Diode of low
power...
Perhaps doing a little research and reading on the Forum
would give you a clue...
Jerry