Here are some pics I wanted to share. The Aurora Host is a nice little unit from DX. I made my heatsinks so to eliminate the driver to battery spring. I didn't much care for the spring putting pressure on the driver. The LOC Red is driven by a Micro Drive with two 16340's with a delrin sleeve adapter. The Blu has a PHR with a Flex and a 18650. Over all I'm happy with the build but the next set I will make a couple small change's to the heat sink module.
I took pics along the way and if you wish you can view them here:
http://s243.photobucket.com/albums/ff252/crfultz/
Here is a beam shot.
Here is the heatsink/module.
The center wire is soldered to the postive input point on the drive.
If you would like to see a different pic of something not shown, let me know...
Chuck
I took pics along the way and if you wish you can view them here:
http://s243.photobucket.com/albums/ff252/crfultz/
Here is a beam shot.
Here is the heatsink/module.
The center wire is soldered to the postive input point on the drive.
If you would like to see a different pic of something not shown, let me know...
Chuck