Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

Question about Dilda configuration?






Dude, WTF stop double posting and use the freaking search button like everyone else does. Then if you cannot find an answer (which is impossible because the dilds is the most talked about laser) then post 1 question. We dont help people that dont help themselves.

And no one is going to PM you about deals, or just give you lasers. We dont like lazy members. Do your own work, make some friends, and then things will fall into place for you if your an honest decent person. If not, dont waste your time.
 
Last edited:
I'm not sure if the 18650 would fit in the laser; CR123 batteries are 17mm in diameter, while 18650 Li-ions are 18mm. If the inner diameter of this host is > 18mm it could fit. But even if it did fit, 3.6v from the battery probably isn't enough to run the laser at full power. This laser needs a good 6v+ if you want to get the full 200mw from it. So unless you're OK with a severely underpowered laser, an 18650 will NOT work.

Also, like Tech Junkie said. Try not to double post. Hit the submit button once, be patient. It may take a while to register, but it will work.
 
Tech_Junkie said:
Dude, WTF stop double posting and use the freaking search button like everyone else does. Then if you cannot find an answer (which is impossible because the dilds is the most talked about laser) then post 1 question. We dont help people that dont help themselves.

And no one is going to PM you about deals, or just give you lasers. We dont like lazy members. Do your own work, make some friends, and then things will fall into place for you if your an honest decent person. If not, dont waste your time.
Click to expand...

I apologize for double posting, i didn't realize if i clicked the submit button more than once that it would post more than one thread. I would hope that you would please accept my apology. I did some looking around the forum and i couldn't find an answer to this specific question. I don't know how to edit my thread so i couldn't add this to my own thread. So i apologize once again. Hope we can get set off on another threat.

Thanks,

Timmy
 
spectral532 said:
I'm not sure if the 18650 would fit in the laser; CR123 batteries are 17mm in diameter, while 18650 Li-ions are 18mm. If the inner diameter of this host is > 18mm it could fit. But even if it did fit, 3.6v from the battery probably isn't enough to run the laser at full power. This laser needs a good 6v+ if you want to get the full 200mw from it. So unless you're OK with a severely underpowered laser, an 18650 will NOT work.

Also, like Tech Junkie said. Try not to double post. Hit the submit button once, be patient. It may take a while to register, but it will work.
Click to expand...

Thank you very much for the information! it has helped me greatly.

i apologize also to you, i did not mean to double post i just didn't realize that if i hit the submit button more than once, that it adds more than one thread! i was also not aware that you could EDIT your threads; so i didn't know i could've just added a question to my other thread.

Sincerest apologies,
Timmy
 
You must log in or register to reply here.





Back
Top