Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers
Buy Site Supporter Role (remove some ads) | LPF Donations
Links below open in new window
FrozenGate by Avery
Project ideas?
- Thread starter Gofilord
- Start date
- Joined
- May 15, 2010
- Messages
- 1,307
- Points
- 48
A Laser Spyro, they're fun to build !
TuhOz
0
- Joined
- Aug 23, 2011
- Messages
- 337
- Points
- 0
Laser gun!
- Joined
- Sep 20, 2008
- Messages
- 17,635
- Points
- 113
- Joined
- May 10, 2011
- Messages
- 1,878
- Points
- 48
Do a Google search for "electronic circuits"....
Jerry
teach me to Google search? what is a Google? :na:
@op also try YouTube there are tons of good channels with good projects (not kipkay) ill go find my subscriptions if you like....
- Joined
- Sep 10, 2011
- Messages
- 73
- Points
- 0
YO Gofilord,
You could look for projects related to your laser hobby, such as LPM's , or scanner drivers, or even laser controllers based on PIC micros. The LPM is probably the most simple and rewarding project I can think of, because there are many designs available on the web for these circuits.
Good luck, and please let us know what you decide to build...........
You could look for projects related to your laser hobby, such as LPM's , or scanner drivers, or even laser controllers based on PIC micros. The LPM is probably the most simple and rewarding project I can think of, because there are many designs available on the web for these circuits.
Good luck, and please let us know what you decide to build...........
- Joined
- Sep 20, 2008
- Messages
- 17,635
- Points
- 113
YO Gofilord,
You could look for projects related to your laser hobby, such as LPM's , or scanner drivers, or even laser controllers based on PIC micros. The LPM is probably the most simple and rewarding project I can think of, because there are many designs available on the web for these circuits.
Good luck, and please let us know what you decide to build...........
Out of the mouths of babes....
And how are you suggesting on calibrating the accuracy
of those "simple and rewarding" LPM projects...:thinking:
Jerry
- Joined
- Sep 10, 2011
- Messages
- 73
- Points
- 0
Out of the mouths of babes....
And how are you suggesting on calibrating the accuracy
of those "simple and rewarding" LPM projects...:thinking:
Jerry
Well I suppose that would depend on what type of circuit he found, and what he has available as far as known standards of measurement.
But he specifically asked for "easy, fun and cheap" ideas, so I wasn't thinking of a complex, feature-packed LPM like a Laserbee. I was more thinking along the lines of those circuits that are nothing more than a photodiode detector and a few passive components, and possibly an op-amp. These ultra simple builds normally use a DMM as a display.
I built one years ago, before I had a real LPM, and it was quite a bit of fun building and tinkering with it. As I recall, the thing was so simple that I didn't even need to buy any parts. I had everything I needed in my stash of salvaged components. The detector, I pulled out of an old barcode scanner.
Even if the OP can't calibrate the thing for absolute measurements, they are still fun to build and useful for relative measurements. Surely you can see the value in a little build like this. And don't worry...I can't see this sort of thing toppling the Laserbee Empire.
aj
Hmmm I think I'll go on the IR thermometer LPM soon.
But I am kinda dissapointed that the accuracy is 15% only..
I don't wanna spend too much on a LPM because it's not really criticle for me in this hobby, I rather spend the money on safty goggles.
Talking about safty goggles, are the T-REX module from Lazerer.com good? they look high quality-ish.
But I am kinda dissapointed that the accuracy is 15% only..
I don't wanna spend too much on a LPM because it's not really criticle for me in this hobby, I rather spend the money on safty goggles.
Talking about safty goggles, are the T-REX module from Lazerer.com good? they look high quality-ish.