Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Pot Mod green laser

Joined
Oct 19, 2008
Messages
9
Points
0
i dont know what i must do to pot mod my true green laser it hasnt a screw and i dont know what thing i must burn

i cant post the pics because i have under 10 posts :eek:
 

Attachments

  • DSC06811.JPG
    DSC06811.JPG
    2.1 MB · Views: 1,651





Joined
Sep 8, 2008
Messages
182
Points
0
If it's got a pot, it's on the other side of the circuit board, next to the battery-contact/spring. The adjustment is 'backwards'. Counter-clockwise is more power, clockwise is less. But don't expect too much. These modules are usually set at the factory for maximum brightness. Turning it up past saturation of the crystal will only waste battery, create more heat and cause mode-hopping...

If you decide to play around anyway, Remember small adjustments, and note where it was set originally...

cheers,
kernelpanic
 

diachi

0
Joined
Feb 22, 2008
Messages
9,700
Points
113
You will probably break your laser .

You can go ahead if you want, but as said above, don't expect much.

If you want more power you need to buy it .

-Adam
 
Joined
Sep 8, 2008
Messages
182
Points
0
tillmann,

The second pic is a bit blurry. But it doesn't look like that driver has an adjustment.

cheers,
kernelpanic
 
Joined
Oct 12, 2008
Messages
323
Points
0
yea i don't see a pot on your laser and i don't think you can pot mod it without a pot
 




Top