LewDude
0
- Joined
- Jul 16, 2017
- Messages
- 364
- Points
- 63
Hi all!! Got a smattering of different setups I'd like to share. In several the "2 way/1 way" mirror(s) were used. They do act as "OK" beam splitters, and at 8"x8" they are a lot larger than the 1"x1/2" pieces I have, even if they aren't absolutely perfect at that job. Sorry up front - I'm going to use 2 posts as It's been a little while and I have more than 20 
I'll describe a bit as we scroll.
650 / 532 / 505 / 490
FS Mirror Behind And Below. 2-way mirror in front to create the "infinite" effect.
3 FS Mirrors Suspended 505 / 490 "spiraling"
638 Through 10xBE Going through the center
Same as before, but only using the 490nm "spiraling" and a 405 going through the center. Dig how the exposure and the wavelengths interact in this one!
Another view, 490 and 638
650 coming downward through fan diffraction grating, then through 2-way mirror. FS mirror below.
650 / 532 / 505 / 490 / 460 Making some triangles. 2-way mirror placed on top of this 'stack' (camera lens right up agains it) and FS mirror below.
These next ones are (from top to bottom) 490 / 638 / 505 / 460 vertically stacked, and multiple configurations of 2-way and FS mirrors.
A couple of the same setup, but where more of the "infinity" mirror effect was used in a more 'erratic' fashion
490 making the cone-shape from above, 650 and 638 coming in from the side
I'll describe a bit as we scroll.
650 / 532 / 505 / 490
FS Mirror Behind And Below. 2-way mirror in front to create the "infinite" effect.
3 FS Mirrors Suspended 505 / 490 "spiraling"
638 Through 10xBE Going through the center
Same as before, but only using the 490nm "spiraling" and a 405 going through the center. Dig how the exposure and the wavelengths interact in this one!
Another view, 490 and 638
650 coming downward through fan diffraction grating, then through 2-way mirror. FS mirror below.
650 / 532 / 505 / 490 / 460 Making some triangles. 2-way mirror placed on top of this 'stack' (camera lens right up agains it) and FS mirror below.
These next ones are (from top to bottom) 490 / 638 / 505 / 460 vertically stacked, and multiple configurations of 2-way and FS mirrors.
A couple of the same setup, but where more of the "infinity" mirror effect was used in a more 'erratic' fashion
490 making the cone-shape from above, 650 and 638 coming in from the side
The expanded 638 through the middle too..
