- Joined
- Mar 29, 2012
- Messages
- 50
- Points
- 0
I've done some searching and have not seen anyone with this find but then again I could be wrong...:thinking:
Anyways, I have This laser which is basically a lazerer rifle v1 clone, and I figured out that you can screw on either a c6 body or the front part of the c6 that holds the heatsink (not the thinner ring, but the part that is about 1inch or so long). The anodizing isn't the exact same color but it is very close to it!
With two of those smaller segments and a small mod to the contact spring( or just one c6 body), a 2x 18650 rifle would be possible!:drool:
Cheers
-Greg
Anyways, I have This laser which is basically a lazerer rifle v1 clone, and I figured out that you can screw on either a c6 body or the front part of the c6 that holds the heatsink (not the thinner ring, but the part that is about 1inch or so long). The anodizing isn't the exact same color but it is very close to it!
With two of those smaller segments and a small mod to the contact spring( or just one c6 body), a 2x 18650 rifle would be possible!:drool:
Cheers
-Greg