Laserdude*2591
New member
- Joined
- Mar 28, 2019
- Messages
- 1
- Points
- 1
If I have a Class 4 laser with all controls in place so that no emission is possible, do I consider this or can I refer to this as Class 1 operation?
Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers
Buy Site Supporter Role (remove some ads) | LPF Donations
Links below open in new window
Laser class question
- Thread starter Laserdude*2591
- Start date
Anthony P
Well-known member
- Joined
- Oct 7, 2018
- Messages
- 535
- Points
- 63
From FDA laser compliance guide:
Laser products are classified on the basis of the highest level of laser
radiation to which human access [1040.10(b)15)] is possible
during operation
only
. Other laser radiation fields to which human access is necessary
only
during maintenance or service
do not affect the classification but may affect
the labeling and safety interlock requirements. Use-factor data, if available
and adequately convincing, may be used in determining the level of laser
emissions from a product.
Laser products are classified on the basis of the highest level of laser
radiation to which human access [1040.10(b)15)] is possible
during operation
only
. Other laser radiation fields to which human access is necessary
only
during maintenance or service
do not affect the classification but may affect
the labeling and safety interlock requirements. Use-factor data, if available
and adequately convincing, may be used in determining the level of laser
emissions from a product.