I'm kinda new to the laser building,and i got some laser assembly's from someone and i tried my best to understand why they are not working anymore,they worked for a bit but now they are only blinking.All of them have 2 laasers one red and one green.
LPF Donation via Stripe | LPF Donation - Other Methods
Links below open in new window
ArcticMyst Security by Avery
Good day everyone!
- Thread starter UncleSiz
- Start date
- Joined
- Dec 12, 2012
- Messages
- 854
- Points
- 63
My first thought is low battery or faulty switch.
Welcome to LPF and good luck!
Welcome to LPF and good luck!
- Joined
- Sep 20, 2013
- Messages
- 17,386
- Points
- 113
Welcome to the LPF. Did you get these lasers defective? Like Matt said I would switch out the battery first. If you suspect the switch it can be shorted across with a clip lead. Depending on the driver it uses that could be the problem. Hope you are able to get at least one working.
