Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

casing for laser pointer?

T

teddy981

0
Joined
Aug 12, 2008
Messages
9
Points
0
So i am going to build my first lasers and i was wondering is there a case that can hold an aixiz module, batteries, etc. so it is pocket sized
 





Read in the section above called "Pro Tips w/ Spyderz: Building Your First DIY Laser"

Tells you each item you need and the links to get what you need.
 
[quote author=el-taco link=1218600372/0#1 date=1218607329]A case as in something that the laser is in (a host... eg. flashlight etc)

yes a host is what i meant, i am using an aixiz module so i am looking for a host that holds an aixiz...
im sorry but is a driver necessary if i am using an aixiz module and a resistor?
 
Checkout jayrob's pocket pal laser guide in the Tutorial section, I posted the link above.
 
What is the simplest driver i could make that would work I don't want to build one with a uncommon component I would need to buy (I have shelves full of components to use already)? If there is no such thing i can buy a driver.
 
teddy981 said:
What is the simplest driver i could make that would work I don't want to build one with a uncommon component I would need to buy (I have shelves full of components to use already)? If there is no such thing i can buy a driver.
Click to expand...
A simple driver is the DDL Driver, but with common components this driver cannot be made very small. If you want to buy a pre-made driver, a cheap kit similar to the DDL driver can be found here, a tiny driver that can fit in the AixiZ module can be found here, and a tiny boost driver can be found here.
 
You must log in or register to reply here.


Back
Top