car troubles

[laserlover]

hey guys, this may be annoying to read but if your like me its faster and it cuts out the non-essential crap, anyways, long story short:

my car wouldn't start the other day, i jumped it using another car and some jumper cables, went to Shuck's, had them test the battery, it was dead, i bought a new one, they helped me put it in, the car still wouldn't start,  the battery terminal was to loose and not making contact, a guy squeezed it together with pliers while i started it, i bought a new and better terminal, went home to replace it, how do i do it?

-thanks,
travis

p.s. the new terminals i bought look exactly like these

 

[L@z3r]

Very simple. The 2 smaller screws unscrew. Strip about 2 inches of the power wire and then put it in between the clamp. Tighten it down with the 2 screws un-loosend earlier.
Do this for the other wire also. Make sure you hook the Negative Black Wire to the Black clamp, And the Positive Red wire to the red clamp

 

[laserlover]

Very simple. The 2 smaller screws unscrew. Strip about 2 inches of the power wire and then put it in between the clamp. Tighten it down with the 2 screws un-loosend earlier.
Do this for the other wire also. Make sure you hook the Negative Black Wire to the Black clamp, And the Positive Red wire to the red clamp

thanks, i just did it and it works!

 

[L@z3r]

[quote author=L@z3r link=1233708825/0#1 date=1233710131]Very simple. The 2 smaller screws unscrew. Strip about 2 inches of the power wire and then put it in between the clamp. Tighten it down with the 2 screws un-loosend earlier.
Do this for the other wire also. Make sure you hook the Negative Black Wire to the Black clamp, And the Positive Red wire to the red clamp

thanks, i just did it and it works![/quote]
FANTASTIC ! Glad i could help

 

[laserlover]

[quote author=travislikescoolstuff link=1233708825/0#2 date=1233716217][quote author=L@z3r link=1233708825/0#1 date=1233710131]Very simple. The 2 smaller screws unscrew. Strip about 2 inches of the power wire and then put it in between the clamp. Tighten it down with the 2 screws un-loosend earlier.
Do this for the other wire also. Make sure you hook the Negative Black Wire to the Black clamp, And the Positive Red wire to the red clamp

thanks, i just did it and it works![/quote]
FANTASTIC ! Glad i could help  [/quote]

check your rep

 

[L@z3r]

[quote author=L@z3r link=1233708825/0#3 date=1233717995][quote author=travislikescoolstuff link=1233708825/0#2 date=1233716217][quote author=L@z3r link=1233708825/0#1 date=1233710131]Very simple. The 2 smaller screws unscrew. Strip about 2 inches of the power wire and then put it in between the clamp. Tighten it down with the 2 screws un-loosend earlier.
Do this for the other wire also. Make sure you hook the Negative Black Wire to the Black clamp, And the Positive Red wire to the red clamp

thanks, i just did it and it works![/quote]
FANTASTIC ! Glad i could help  [/quote]

check your rep    [/quote]
Yay Thx