Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donations

Links below open in new window

ArcticMyst Security by Avery

Anyone used these goggles before?






Joined
Jul 31, 2013
Messages
33
Points
0
Hi Jessl,

Did you realise that
this is exactly the same as the one you linked?

If not, I can safely tell you that, it is the same. And you are just paying a lot more for the case.

Next, it works well with my 2W 445nm laser. When I put it on, I can see the spot quite clearly, although I cannot see the beam.

They are of average quality, and since it is suitable for my 2W, it should be suitable for your 1.3W as well.

Cheers,
dragonizer
 
Joined
Jul 1, 2013
Messages
1,169
Points
0
Hi Jessl,

Did you realise that
this is exactly the same as the one you linked?

If not, I can safely tell you that, it is the same. And you are just paying a lot more for the case.

Next, it works well with my 2W 445nm laser. When I put it on, I can see the spot quite clearly, although I cannot see the beam.

They are of average quality, and since it is suitable for my 2W, it should be suitable for your 1.3W as well.

Cheers,
dragonizer
i Think that was another guy as this member only has one post
 
Last edited:
Joined
Jul 31, 2013
Messages
33
Points
0
i Think that was another guy as this member only has one post

Wut? I don't understand what you are talking about? I am just answering the "One-post guy's" question?

Which other guy you think I have mistaken for?
 
Joined
Jul 1, 2013
Messages
1,169
Points
0
There wss another guy with two posts that had the same googles and same question only an hour or so this member asked it, i answered it, i couldn't believe two new members would ask about same googles only an hour apart
 
Joined
Jul 31, 2013
Messages
33
Points
0
There wss another guy with two posts that had the same googles and same question only an hour or so this member asked it, i answered it, i couldn't believe two new members would ask about same googles only an hour apart

Oh, I didn't notice that. Imma go see your response. :)
 
Joined
Aug 19, 2011
Messages
58
Points
0
if I can give you some advice, buy a pair of "eagle pair", they cost a little more but I think they have a better quality, I have taken them on survival laser.
Safety
 
Joined
Jul 31, 2013
Messages
33
Points
0
if I can give you some advice, buy a pair of "eagle pair", they cost a little more but I think they have a better quality, I have taken them on survival laser.
Safety

If you are under budget, just get the generic China one first. Eagle Pair is very expensive compared to those China ones. But Eagle Pair works a hundred times better than those China ones.

Here's the link: Survival Laser (Get the one with the correct wavelength!)

Remember that your eyes are more important than anything else!

dragonizer
 
Joined
Apr 24, 2013
Messages
549
Points
43
Those goggles will save your eyes if you accidently get flashed, but are not enough for burning or close work. I put a 2.5w plus 445nm at them and they held for way longer than one would think. (click on the pic).
The LPM is a Bluefan on High mode, so you have to add a zero to the readout.
If your going to burn things or do close work get a real pare, Eagle, OEM etc.
Please be safe. :beer:

 
Last edited:
Joined
Jan 26, 2014
Messages
71
Points
8
got 2 cheap red ebay glasses,they seem to be the same when reading the offer text but:

from seller happysmile999 (sold over 2600 of this) when testing with 445nm (divergent to prevent burning a hole like in the video) laser:

hs1.jpg


and from seller bestsave (only 148 sold)

bs1.jpg


you see only the bestsave glasses stop the beam, also on the bestave glasses
is an ansi z87.1 mark

bs2.jpg


and both:

hsbs.jpg
 
Joined
Jan 22, 2014
Messages
464
Points
28
I got a couple of pairs from happy smiles, red ones and blue ones but seeing (excuse the pun!) that i have Maglite build coming from Jayrob I have ordered 2 Eagle pair from Survival Lasers. yes more expensive but I like my eyes being able to see for me!
 




Top